Guide for reporting to National Pollutant Release Inventory 2001: references

References and bibliography

References

Canada Gazette (March, 2001) "Notice with Respect to Substances in the National Pollutant Release Inventory for 2001", Department of the Environment, Extract Canada Gazette, Part I (March 24, 2001).

Canada Gazette (April, 2001) "Notice with Respect to Substances in the National Pollutant Release Inventory for 2001 - Erratum", Department of the Environment, Extract Canada Gazette, Part I (April 7, 2001).

Canada Gazette (December, 2001) "Notice with Respect to Substances in the National Pollutant Release Inventory for 2001 - Amendment", Department of the Environment, Extract Canada Gazette, Part I (December 29, 2001).

Canada Gazette (1992) "Export and Import of Hazardous Wastes Regulations", Department of the Environment, Extract Canada Gazette, Part II (December 2, 1992).

Canada Gazette (1991) "Domestic Substances List", Department of the Environment, Extract, Supplement Canada Gazette, Part I (January 26, 1991).

Environment Canada (2000) "Supplementary Guide for Reporting to the National Pollutant Release Inventory - Alternate Thresholds - 2000".

Environment Canada (2001) "Guidance for Wood Preservation Facilities Reporting to the National Pollutant Release Inventory", in collaboration with the Canadian Institute of Treated Wood (April, 2001).

Environment Canada (1993) "User's Guide to Hazardous Waste Classification".

Environment Canada (2000) "Determination of Level of Quantification for Measuring HCB and PCDD/PCDF in Soil", Analysis and Air Quality Division, Environmental Technology Centre, Draft (February, 2000).

Environment Canada (1997) "Determination of LoQs for Measuring Hexachlorobenzene in Selected Solvents", Draft Report AAQD 97-01, Analysis and Air Quality Division, Environmental Technology Centre (revised September, 1997).

Environment Canada (1999) "Level of Quantification Determination: PCDD/PCDF and Hexachlorobenzene", Analysis and Air Quality Division, Environmental Technology Centre (November, 1999).

"McGraw-Hill Encyclopedia of Science and Technology", New York, McGraw-Hill (1982).

NATO/CCMS (North Atlantic Treaty Organization/Committee on the Challenges of Modern Society) (1998) "Pilot Study on Internal Information Exchange on Dioxins and Related Compounds", International Toxicity Equivalency Factor (I-TEF), Method of Risk Assessment for Complex Mixtures of Dioxins and Related Compounds, Report No. 176. 26 pp.

Statistics Canada (1998) "North American Industry Classification System (NAICS) Canada Manual - 1997", Catalogue 12-501-XPE, Ottawa, ON.

Statistics Canada (1989) "Standard Industrial Classification - 1980", Standards Division, Catalogue 12-501E, Ottawa, ON. van den Berg M., L. Birnbaum, B.T.C. Boseveld, B. Brunström, P. Cook, M. Feeley, J.P. Giessy, A. Hanberg, R. Hasegawa, S.W. Kennedy, T. Kubiak, J.C. Larsen, F.X. Rolaf van Leeuwen, A.K.D. Liem, C. Nolt, R.E. Peterson, L. Poellinger, S. Safe, D. Schrenk, D. Tillitt, M. Tysklind, M. Younes, F.Waern, T. Zackarewski (1998) "Toxic Equivalency Factors (TEFs) for PCBs, PCDDs, PCDFs for Humans and Wildlife". Environ. Health Perspect. 106:775-792 (December, 1998).

Publications of the U.S. Environmental Protection Agency

Guidance documents for reporting to the Toxics Release Inventory

In 1988 and 1990, the Office of Pollution Prevention and Toxics of the U.S. Environmental Protection Agency (U.S. EPA) developed many industry-specific guidance manuals to help industries estimate the releases for reporting to the Toxics Release Inventory (TRI). Since 1998, some of these manuals have been revised and some additional industry-specific guidance manuals have been prepared. These manuals, listed below, could also be used for reporting to the NPRI.

1. Estimating Chemical Releases from Monofilament Fiber Manufacturing, EPA 560/4-88-004a (January, 1988)
2. Estimating Chemical Releases from Printing Operations, EPA 560/4-88-004b (January, 1988)
3. Estimating Chemical Releases from Electrodeposition of Organic Coatings, EPA 560/4-88-004c (January, 1988)
4. Estimating Chemical Releases from Spray Application of Organic Coatings, EPA 560/4-88-004d (January, 1988)
5. Estimating Chemical Releases from Semi-Conductor Manufacturing, EPA 560/4-88-004e (January, 1988)
6. Estimating Chemical Releases from Formulation of Aqueous Solutions, EPA 560/4-88-004f (March, 1988)
7. Estimating Chemical Releases from Electroplating Operations, EPA 560/4-88-004g (January, 1988)
8. Estimating Chemical Releases from Textile Dyeing, EPA 560/4-88-004h (February, 1988)
9. Estimating Chemical Releases from Presswood and Laminated Wood Products Manufacturing, EPA 560/4-88-004i (March, 1988)
10. Estimating Chemical Releases from Roller, Knife, and Gravure Coating Operations, EPA 560/4-88-004j (February, 1988)
11. Estimating Chemical Releases from Paper and Paperboard Production, EPA 560/4-88-004k (February, 1988)
12. Estimating Chemical Releases from Leather Tanning and Finishing, EPA 560/4-88-0041 (February, 1988)
13. Estimating Chemical Releases from Wood Preserving Operations, EPA 560/4-88-004p (February, 1988)
14. Estimating Chemical Releases from Rubber Production and Compounding Operations, EPA 560/4-88-004q (March, 1988)
15. Issue Paper - Clarification and Guidance for the Metal Fabrication Industry, (January, 1990)
16. Guidance for Food Processors, EPA 560/4-90-014 (June, 1990)
17. EPCRA Section 313 Reporting Guidance For Food Processors (Update), EPA 745-R-98-011 (September, 1998)
18. EPCRA Section 313 Reporting Guidance for Spray Application and Electrodeposition of Organic Coatings, EPA 745-R-98-014 (December, 1998)
19. Industry Guidance for Coal Mining Facilities, EPA 745-B-99-002 (January, 1999)
20. Industry Guidance for Electricity Generating Facilities, EPA 745-B-99-003 (January, 1999)
21. Industry Guidance for Metal Mining Facilities, EPA 745-B-99-001 (January, 1999)
22. Industry Guidance for Chemical Distribution Facilities, EPA 745-B-99-005 (January, 1999)
23. Industry Guidance for RCRA Subtitle C TSD Facilities and Solvent Recovery Facilities, EPA 745-B-99-004 (January, 1999)
24. Industry Guidance for Petroleum Terminals and Bulk Storage Facilities, EPA 745-B-99-006 (January, 1999)
25. EPCRA Section 313 Reporting Guidance for Semiconductor Manufacturing, EPA 745-R-99-007 (July, 1999)
26. EPCRA Section 313 Reporting Guidance for Leather Tanning and Finishing Industry, EPA 745-B-00-012 (April, 2000)
27. EPCRA Section 313 Reporting Guidance for the Printing, Publishing, and Packaging Industry, EPA 745-B-00-005 (May, 2000)
28. EPCRA Section 313 Reporting Guidance for Rubber and Plastics Manufacturing, EPA 745-B-00-017 (May, 2000)
29. EPCRA Section 313 Reporting Guidance for the Textile Processing Industry, EPA 745-B-00-008 (May, 2000)
30. EPCRA Section 313 Reporting Guidance for the Presswood and Laminated Products Industry, EPA 260-B-01-013 (August, 2001)

    In addition, the U.S. EPA has developed a group of guidance documents specific to individual chemicals and chemical categories. Some of these documents are relevant to be used for reporting to the NPRI and are listed below.

31. Guidance for Reporting Aqueous Ammonia - Revised, EPA 745-R-00-005 (December, 2000)
32. List of Toxic Chemicals Within The Water Dissociable Nitrate Compounds Category and Guidance for Reporting - Revised, EPA 745-R-00-006 (December, 2000)
33. Guidance for Reporting Sulfuric Acid (acid aerosols including mists, vapors, gas, fog, and other airborne forms of any particle size), EPA 745-R-97-007 (November, 1997 and updated March, 1998)
34. Guidance for Reporting Toxic Chemicals within the Polycyclic Aromatic Compounds Category (Final), EPA 260-B-01-03 (August, 2001)
35. List of Toxic Chemicals within the Polychlorinated Alkanes Category and Guidance for Reporting, EPA 745-B-99-023 (June, 1999)
36. Guidance for Reporting Hydrochloric Acid (acid aerosols including mists, vapors, gas, fog, and other airborne forms of any particle size), EPA 745-B-99-014 (December, 1999)
37. Guidance for Reporting Toxic Chemicals within the Dioxin and Dioxin-like Compounds Category (Final), EPA 260-B-01-004 (August, 2001)

Locating and estimating (L&E) documents

To assist groups interested in preparing inventories of air emissions of various potentially toxic substances, the U.S. EPA Office of Air Quality and Planning Standards has prepared a series of L&E documents that compiles available information on sources and emissions of these substances. Documents in this series are listed below.

Other documents from the U.S. EPA

77. Compilation of Air Pollutant Emission Factors, Vol. 1: Stationary Point and Area Sources, U.S. EPA, AP-42, 5th Edition (1996), and AP-42 Supplements A, B, C, D, E, and F (1996, 1997, 1998, 1999, and 2000)
78. Toxic Air Pollutant Emission Factors - A Compilation for Selected Air Toxic Compounds and Sources, Second Edition, U.S. EPA, EPA 450/2-90-011 (1990)
79. Protocols for Equipment Leak Emission Estimates, U.S. EPA, EPA 453/R-95-017 (November, 1995)
80. Hot Mix Asphalt Plants - Emission Assessment Report (Draft), U.S. EPA, EPA 454/R-00-0XX (June, 2000)

Copies of the U.S. EPA documents are available from:

U.S. Environmental Protection Agency
National Center For Environmental Publications and Information (NCEPI)
P.O. Box 42419
Cincinnati OH 45242
U.S.A.

Tel: 513-489-8190
Fax: 513-489-8695

U.S. EPA documents can be downloaded from the U.S. Toxics Release Inventory (TRI) Web or the U.S. EPA's Technology Transfer Network Web site.

Or, they can be ordered from:

National Technical Information Service
5285 Port Royal Road
Springfield VA 22161
U.S.A.

Tel: 703-605-6000
Fax: 703-605-6900
E-mail: orders@ntis.fedworld.gov
Web site: www.ntis.gov/

Documents produced by industry associations

81. Evaporation Loss from External Floating Roof Tanks, American Petroleum Institute, Publication 2517 (1994)
82. Evaporation Loss from Fixed Roof Tanks, American Petroleum Institute, Chapter 19.1 (1991)
83. Evaporation Loss from Internal Floating Roof Tanks, American Petroleum Institute, Publication 2519 (1996)
84. Review of Air Toxic Emission Calculations from Storage Tanks, Air Toxic Emissions Calculation Validation Program: Analysis of Crude Oil and Refined Product Samples and Comparison of Vapor Composition to Model Predictions, American Petroleum Institute, Publication 2525 (1992)

Copies of the above reports can be ordered from:

American Petroleum Institute
Order Desk
1200 L Street Northwest
Washington, DC 20005
U.S.A.

Tel: 202-682-8375
Fax: 202-962-4776

85. NCASI Handbook of Chemical Specific Information for SARA Section 313 Form R Reporting - and yearly updates, National Council of The Paper Industry for Air and Stream Improvement Inc. (1991)
86. Handbook of Substance-Specific Information for National Pollutant Release Inventory (NPRI) Reporting, National Council of the Paper Industry for Air and Stream Improvement Inc. (2000)

The reports can be ordered from either:

NCASI
P.O. Box 13318
Research Triangle Park
NC 27709-3318
U.S.A.

Tel: (919) 558-1999
Fax: (919) 558-1998

Canadian Pulp and Paper Association
1155 Metcalfe St 19th floor
Montreal QC
H3B 4T6

Tel: 514-866-6621
Fax: 514-866-3035

Guidance document for the wood preservation industry

87. Environment Canada (2001) "Guidance for Wood Preservation Facilities Reporting to the National Pollutant Release Inventory (NPRI)", in collaboration with the Canadian Institute of Treated Wood (April, 2001).

    This document can be downloaded from the NPRI web section.

General information

88. Howard, P. H. and M. Neal, Dictionary of Chemical Names and Synonyms, Lewis Publishers, Chelsea, MI (1992).

89. Lide, David R., CRC Handbook of Chemistry and Physics, 75th Edition, CRC Press, Inc., Boca Raton, FL (1995) pp. 15-38, Characteristics of Particles and Particle Dispersoids.