Revised June 25, 2019 - Lists of Steel, Aluminum and Other Goods Imported from the U.S. Subject to Remission of Countermeasures
In response to the U.S. tariffs on Canadian steel and aluminum, the Government of Canada applied reciprocal countermeasures as of July 1, 2018 on imports of steel, aluminum and other goods from the U.S. Canada stood firm and did not back down until an understanding was reached with the U.S. on May 17, 2019. As part of that understanding, the U.S. and Canada removed their tariffs and countermeasures, as announced on May 20, 2019.
To protect the competitiveness of businesses affected by Canadian countermeasures while they were applied, the Government announced that:
- certain steel and aluminum goods will be eligible for relief from surtaxes paid or payable under the United States Surtax Order (Steel and Aluminum); and
- certain other goods will be eligible for relief from surtaxes paid or payable under the United States Surtax Order (Other Goods).
The goods currently covered in Schedule 1, Schedule 2, Schedule 3 and Schedule 4 of the United States Surtax Remission Order (the "Remission Order") are listed below.
- For goods in Schedule 1, relief is granted for steel and aluminum products imported from the U.S. on or after July 1, 2018.
- For goods in Schedule 2, relief is granted for a period from July 1, 2018 to May 20, 2019 for steel and aluminum products imported from the U.S.
- For goods in Schedule 3, relief is granted for steel and aluminum products imported from the U.S. This relief is limited to specifically listed importers, for specified periods and subject to applicable conditions as prescribed in Schedule 3.
- For goods in Schedule 4, relief is granted for an indefinite period for other goods imported from the U.S. on or after July 1, 2018, subject to applicable conditions, as provided in the Remission Order.
The latest changes to the Remission Order were made pursuant to the Order Amending the United States Surtax Remission Order, No. 2019-2 and entered into force on June 25, 2019. The changes to the Remission Order are denoted in bold in the Schedules below and consist of:
- amendments to items 14 to 17, 25, 26, 28, 31, 34, 35, 40, 41, 47 to 49, 52, 83, 104, 115, 120, 121, 138, 144, 146, 150, 155, 156, 158 and 160 of Schedule 1;
- the addition of items 169 to 394 to Schedule 1;
- amendments to items 8, 28 to 31, 34, 44 and 45 of Schedule 2;
- the addition of items 47 to 62 to Schedule 2;
- amendments to items 14, 109 to 115, 159, 162, 168, 172, 174 to 176, 178, 179, 183, 184, 233, 234, 283, 292, 296 and 310 of Schedule 3;
- the addition of items 315 to 380 to Schedule 3; and
- the addition of items 7 to 11 to Schedule 4.
Note: The electronic versions of the Schedules of the Remission Order are provided for reference only. In case of discrepancy, the Schedules of the Remission Order as published in the Canada Gazette, Part II prevail.
| Item | Description of Goods |
|---|---|
| 1 | semi-finished product of cold-rolled annealed spring steel of grade SAE 1095 |
| 2 | flat-rolled product, of a width of 600 mm or more, not further worked than hot-rolled, pickled, of grade ASTM A1039 (500LA), of a nominal thickness of 0.039 inch |
| 3 | flat-rolled product of grade HPS 70 W |
| 4 | flat-rolled product for production of large diameter line pipe of grade X65 or X70 (API 5L) |
| 5 | flat-rolled product, not further worked than cold-rolled, in coils, of Martensitic grades |
| 6 | flat-rolled product, batch annealed tin plate |
| 7 | flat-rolled product of iron, non-alloy or other alloy steel, electrogalvanized |
| 8 | flat-rolled product, galvanized, of grade TRIP TRC400Y/690T, of a width of 600 mm or more, of a thickness of 0.057 inch or more |
| 9 | flat-rolled product, galvannealed, of grade ASTM A653/HSLA 050XK, of a width of 70 inches |
| 10 | flat-rolled product, with aluminized coating, of a thickness not exceeding 2.8 mm, of a width not exceeding 863 mm, meeting standard ASTM A929 or CSA G401 |
| 11 | flat-rolled product of iron, non-alloy or other alloy steel, aluminized |
| 12 | flat-rolled product, not further worked than cold-rolled, of specification MS-264-060XK |
| 13 | flat-rolled product, not further worked than cold-rolled, of grade C1010 SAEJ403, of tensile strength from 70,000 to 84,000 psi inclusive, of elongation on 2 inches of 3%, of a minimum yield strength of 65,000 psi |
| 14 | Flat-rolled product or flat bar, of iron or non-alloy steel, not in coils, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.25 inch, of a width of more than 8 inches to 12 inches inclusive |
| 15 | Flat-rolled product or flat bar, of iron or non-alloy steel, not in coils, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.375 inch, of a width of more than 10 inches to 12 inches inclusive |
| 16 | Flat-rolled product or flat bar, of iron or non-alloy steel, not in coils, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.5 inch, of a width of more than 10 inches to 12 inches inclusive |
| 17 | Flat-rolled product or flat bar, of iron or non-alloy steel, not in coils, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.625 inch, of a width of more than 10 inches to 12 inches inclusive |
| 18 | semi-finished product or bar and rod, of ductile cast iron of grade 65-45-12 |
| 19 | bar and rod, of grade 4130, vacuum degassed, of hardness of minimum 197 HBW and maximum 237 HBW, of a minimum tensile strength of 95,000 psi, of a minimum yield strength of 75,000 psi, of a diameter of up to 12 inches inclusive |
| 20 | bar and rod, of grade 4140, vacuum degassed, of hardness of minimum of 205 HBW and maximum of 237 HBW, of a minimum tensile strength of 100,000 psi, of a minimum yield strength of 80,000 psi, of a diameter of up to 12 inches inclusive |
| 21 | bar and rod, of grade 4130, vacuum degassed, of hardness of minimum 237 HBW, of a minimum tensile strength of 115,000 psi, of a minimum yield strength of 100,000 psi, of a diameter of up to 12 inches inclusive |
| 22 | bar and rod, of grade 4140 or 4145, vacuum degassed, of hardness of minimum of 253 HBW, of a minimum tensile strength of 125,000 psi, of a minimum yield strength of 110,000 psi, of a diameter of up to 12 inches inclusive |
| 23 | bar and rod, of grade 4140, heat treated and stress relieved, of a diameter of up to 12 inches, and of a hardness of minimum 32 RC and maximum 34 RC or of a minimum yield strength of up to 130,000 psi |
| 24 | bar and rod, of grade 4340, heat treated and stress relieved, of a diameter of up to 12 inches, and of a hardness of minimum 32 RC and maximum 36 RC or of a minimum yield strength of up to 140,000 psi |
| 25 | Bar and rod, annealed, of grade 4140, of a diameter of less than 4 inches or more than 7 inches to 12 inches inclusive |
| 26 | Bar and rod, of grade 8620, of a diameter of more than 7 inches to 12 inches inclusive |
| 27 | bar and rod, of proprietary grade SW85, of a diameter from 4.0625 to 12 inches inclusive |
| 28 | Bar and rod, of iron or non-alloy steel, of grade AISI 1018 (ASTM A108), of a diameter of more than 7 inches to 12 inches inclusive |
| 29 | bar and rod, of iron or non-alloy steel, nitrocarburized or oxidized, of a minimum yield strength of 75,000 psi, of maximum surface finish of 16 RMS |
| 30 | bar and rod, of iron or non-alloy steel, of grade ASTM A108, of a diameter of more than 4 inches |
| 31 | Bar and rod, of iron or non-alloy steel, chrome plated, of a minimum yield strength of up to 120,000 psi inclusive |
| 32 | standard I sections S of 3 inches by 5.7 inches, of specification ASTM A529 Grade 50 |
| 33 | bar and rod, hot-rolled, in irregularly wound coils, of stainless steel, of grade 17-7, 201, 208Lsi, 302, 302HQ, 304, 304L, 305, 308L, 309L, 309Lsi, 310, 314, 316, 316L, 316Lsi, 321, 327, 409, 409NB, 410, 420, 430, 430L or 450 |
| 34 | Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of grade A286, 13-8, 15-5, 15-5 PH, 17-4, 17-4 PH, 201, 303, 303Se, 304, 304L, 316, 316L, 321, 327, 347, 409, 410, 420, 430, 450, AMS Custom 465 or 2304 |
| 35 | Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grade 13-8, 15-5, 15-5 PH, 17-4, 201, 303, 304, 304L, 316, 316L, 321, 327, 409, 410, 420, 430, 450 or 465 |
| 36 | bar and rod, of stainless steel, of grade 201, 304, 304L, 316, 316L, 321, 327, 409, 420, 430 or 450, of a diameter of less than 8 inches |
| 37 | bar and rod, of stainless steel, chrome plated |
| 38 | angle, shape and section, of stainless steel, of grade 201, 304, 304L, 316, 316L, 321, 327, 409, 420, 430 or 450 |
| 39 | wire of stainless steel, hot-rolled and annealed, soap coated, of type 304L, of a diameter of 0.312 inch |
| 40 | Wire of stainless steel, nickel coated, of type 302 (ASTM A313 specification), of a diameter of up to 5.25 mm |
| 41 | Wire of stainless steel, nickel coated, of type 17-7PH (ASTM A313 specification), of a diameter of up to 5.25 mm |
| 42 | flat-rolled product, of grade Mangabraze |
| 43 | flat-rolled product, aluminized, of specification GMW2M-ST-S-CR5-T1M-120 |
| 44 | bar and rod, of grade 4715, vacuum degassed, of hardness of minimum 56 HRC and maximum 62 HRC, of a minimum tensile strength of 119,000 psi, of a minimum yield strength of 95,000 psi, of a diameter of up to 7 inches |
| 45 | bar and rod of grade 1522CV |
| 46 | bar and rod of alloy Aermet 100 |
| 47 | Bar and rod, of proprietary grade Finkl Steel FX-Xtra, of a diameter of up to 16 inches |
| 48 | Bar and rod, of proprietary grade Finkl Steel MLQ (mold lens quality) P20 |
| 49 | Bar and rod, of proprietary grade Finkl Steel MD or MDI (mold quality steel) P20 |
| 50 | bar and rod of proprietary grade Microtec 4M95 |
| 51 | bar and rod of proprietary grade Impact 7 |
| 52 | Bar and rod, not further worked than cold-formed or cold-finished, of grade 5140H |
| 53 | W-section beams |
| 54 | chrome silicon spring wire |
| 55 | wire of chrome silicon valve quality |
| 56 | pipe and tube, drawn over mandrel (DOM) of specification SP-TU-001 |
| 57 | pipe and tube, drawn over mandrel (DOM) of specification ASTM A513 Type 5 |
| 58 | pipe and tube, cold drawn, seamless |
| 59 | pipe and tube, seamless, cold drawn of specification SP-TU-009 |
| 60 | pipe and tube, seamless, hot-rolled of specification SP-TU-002 |
| 61 | pipe and tube, hot finished seamless pressure tubing, of grade 1026, of an outside diameter from 3 inches to 24 inches inclusive, of a wall thickness from 0.5 inch to 4 inches inclusive |
| 62 | pipe and tube, hot finished seamless pressure tubing, of grade 4130, of an outside diameter from 3 inches to 24 inches inclusive, of a wall thickness from 0.5 inch to 4 inches inclusive |
| 63 | pipe and tube, hot finished seamless pressure tubing, of grade 4140, of an outside diameter from 3 inches to 24 inches inclusive, of a wall thickness from 0.5 inch to 4 inches inclusive |
| 64 | pipe and tube, hot finished seamless pressure tubing, of proprietary grade Impact 7, of an outside diameter from 3 inches to 24 inches inclusive, of a wall thickness from 0.5 inch to 4 inches inclusive |
| 65 | coiled tubing, of an outside diameter from 0.75 inch to 3.5 inches inclusive, of a length of up 10,000 meters, of a wall thickness from 0.08 inch to 0.3 inch inclusive, of a kind used in drilling for oil or gas |
| 66 | pipe and tube, of iron, non-alloy or other alloy steel, aluminized |
| 67 | pipe and tube, of circular, square, rectangular or other non-circular cross section, of iron, non-alloy steel, alloy steel or stainless steel, in-line galvanized |
| 68 | pipe and tube, welded, of grade 4140, of circular cross-section |
| 69 | pipe and tube, welded, of grade 4142, of circular cross-section |
| 70 | pipe and tube, straight seam, electric resistance welded, of circular cross-section of an outside diameter of more than 16 inches up to 20 inches inclusive, of a wall thickness of up to 0.625 inches, of grade CSA G40.21 |
| 71 | pipe and tube, electric resistance welded (ERW) drawn over mandrel (DOM) of any specification |
| 72 | pipe and tube, electric resistance welded (ERW), of nominal pipe size of 0.125 inch, of outside diameter of 0.405 inch |
| 73 | pipe and tube, electric resistance welded (ERW), of nominal pipe size of 0.25 inch (6.35 mm), of outside diameter of 0.540 inch |
| 74 | pipe and tube, electric resistance welded (ERW), of nominal pipe size of 0.375 inch, of outside diameter of 0.675 inch |
| 75 | coiled tubing, of other alloy steel, of an outside diameter from 0.75 inch to 3.5 inch inclusive, of a length of up 10,000 meters, of a wall thickness from 0.08 inch to 0.3 inch |
| 76 | pipe and tube, of square section, of a cross-sectional dimension of more than 12 inches up to 16 inches inclusive |
| 77 | pipe and tube, straight seam, electric resistance welded, of square and equivalent rectangular sections, of dimensions of more than 12 inches by 12 inches up to 16 inches by 16 inches inclusive, of thickness of up to 0.625 inch, of grade CSA G40.21, ASTM A252 or ASTM A500 |
| 78 | pipe and tube, straight seam, electric resistance welded, of square section, of dimension of 1.5 inch by 1.5 inch, of a thickness of 0.25 inch, of grade CSA G40.21, ASTM A252 or ASTM A500 |
| 79 | pipe and tube, welded, of non-circular cross-section other than square or rectangular, of grade AISI 1526 |
| 80 | pipe and tube, welded, of non-circular cross-section other than square or rectangular, of grade AISI 4130 |
| 81 | aluminum plate, sheet and strip, of alloy AA3002, AA3003, AA3004, AA3104, AA3105, AA3105-H12, AA3105-H24, AA5005, AA5052, AA5083, AA5086, AA5182, AA5205, AA5251, AA5454, AA5657, AA5754, AA6005A, AA6014, AA6016, AA6061, AA6083, AA6111, AA6181A/AA6005A or AA6451, of a thickness from 0.2 mm to 9.2 mm inclusive |
| 82 | aluminum composite material consisting of aluminum sheets bonded by a thermoplastic core |
| 83 | Aluminum cans of a size from 89 ml to 1000 ml |
| 84 | flat-rolled product, not further worked than hot-rolled, of proprietary grade Usibor 1500, of a thickness from 0.8 mm to 2.5 mm inclusive, of a width of up to 1650 mm |
| 85 | flat-rolled product, hot-rolled, pickled and oiled, of grade HSLA 420LA, of specification SAE2340, of a minimum thickness from 0.055 inch to 0.066 inch inclusive |
| 86 | flat-rolled product, hot-rolled, pickled and oiled, of grade HSLA 500LA, of specification GMW3032M-ST-S, of a minimum thickness of 0.045 inch |
| 87 | flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 50, of a minimum thickness of 0.06 inch, of a width of 51.9 inches or 56.5 inches |
| 88 | flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 50, of a minimum thickness of 0.066 inch, of a width of 53.1 inches |
| 89 | flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 60, of a minimum thickness of 0.047 inch or 0.058 inch |
| 90 | flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 60, of a nominal thickness of 0.063 inch, of a width of 48.475 inches |
| 91 | flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 60, of a minimum thickness of 0.066 inch, of a width of 50.9 inches |
| 92 | flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 60, of a minimum thickness of 0.067 inch, of a width of 47.4 inches or 53.2 inches |
| 93 | flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a minimum thickness from 0.044 inch to 0.06 inch inclusive |
| 94 | flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a nominal thickness of 0.063 inch or 0.064 inch |
| 95 | flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a minimum thickness of 0.067 inch, of a width of 55.916 inches |
| 96 | flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a minimum thickness from 0.073 inch, of a width of 59.186 inches |
| 97 | flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a minimum thickness of 0.075 inch, of a width of 54.3, 54.67, 55.5 or 56.5 inches |
| 98 | flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 80, of a minimum thickness of 0.067 inch, of a width of 50.8 inches |
| 99 | flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 80, of a minimum thickness of 0.066 inch, of a width of 52.423 or 54.2 inches |
| 100 | flat-rolled product, not further worked than hot-rolled, of grade Ympress 100XF, of a thickness of 0.5 inches, of a width of 60 inches, of a length of 120 inches |
| 101 | flat-rolled product, not further worked than cold-rolled, of grade CR420LA, of specification GMW3032M-ST-S, of a thickness of 0.08 inches or more |
| 102 | flat-rolled product, not further worked than cold-rolled, of grade HSLA 70, of a minimum thickness of 0.0566 inch, of a width of 45.863 inches |
| 103 | flat-rolled product, not further worked than cold-rolled, of grade HSLA 70, of a minimum thickness of 0.0606 inch, of a width of 46.3 inches |
| 104 | Flat-rolled product, in coils, not further worked than cold-rolled, of grade 1074, of a thickness from 0.032 inch to 0.165 inch inclusive, of a width from 24.98 inches to 48 inches inclusive |
| 105 | flat-rolled product, galvanized, of specification HR-550-610-LA-S-G160/60 U, of a nominal thickness of less than 2.0 mm |
| 106 | flat-rolled product, galvanized, of specification GMW3023M-ST-S-HR550LA, of a nominal thickness of less than 2.0 mm |
| 107 | flat-rolled product, galvanized, of grade HSLA 50, of a minimum thickness of 0.17 inch |
| 108 | flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.066, 0.0667, 0.067, 0.073, 0.074 or 0.0743 inch |
| 109 | flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.083 inch, of a width of 41 inches |
| 110 | flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.085 inch, of a width of 47.266 inches |
| 111 | cold-rolled and hot dipped steel substrate coil, of Grade 50 or 80, of specification ASTM A792, plated or coated with aluminum-zinc alloys, of a thickness of 3.81 mm, of a width of 1041.4 mm |
| 112 | flat-rolled product, aluminum-silicon coated, of proprietary grade Usibor 1500, of a thickness from 0.8 mm to 2.5 mm inclusive, of a width of up to 1650 mm |
| 113 | flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade SA516 Gr 70 normalized, of a thickness of 4.5 inches, of a width of less than 600 mm |
| 114 | flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, of grade 10B2, of a nominal thickness of 0.12 inch, of a width of 3.65 or 5.2 inches |
| 115 | Flat-rolled product, not further worked than cold-rolled, of grade 1074, of a width from 1.575 inches to 9.5 inches inclusive |
| 116 | flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, of grade C1050 or C1075, of specification ASTM A682 or A684, of a thickness of 0.0098 inch or more |
| 117 | flat-rolled product of iron or non-alloy steel, nickel and brass coated or plated by an electro-plating process, of a width of less than 600 mm |
| 118 | bar and rod, hot-rolled, of grade A105, A350, 1018, 1030, 1040, 1045, 1050 or 1055, vacuum degassed, of a diameter from 2.5 inches to 10 inches inclusive |
| 119 | bar and rod, of grade A36, of a thickness of 1.5 inches, of a width of 1.625 inches, of a length of 5.5 inches |
| 120 | Bar and rod, not further worked than hot-rolled, of grade 4140, of a diameter from 7 inches to 12 inches inclusive, of a minimum yield strength of up to 70,000 psi |
| 121 | Bar and rod, of grade 60, of specification ASTM A615 or AASHTO M31, epoxy coated, of a diameter from 0.5 inch to 2 inches inclusive |
| 122 | cold drawn bar, of grade 1018, of a diameter from 4.5 inches to 5.75 inches inclusive, of specification ASTM A108 |
| 123 | cold drawn bar, of grade 1144, of a diameter from 2.5 inches to 4.5 inches inclusive, of specification ASTM A311, of a minimum yield strength of 100,000 psi |
| 124 | bar and rod, in coils, not further worked than cold-formed or cold-finished, of grade AISI 1010, 1015, 1018, 1020, 1022, 10B22 or 8620, of a diameter from 0.468 inches to 1.46 inches inclusive |
| 125 | nitrated round bar, of grade C1045, of minimum yield strength of up to 100,000 psi |
| 126 | wire, in coil, of grade AISI 10B35, silicon killed, with phosphate and polymer coating, of a diameter of 1.156 inches |
| 127 | wire of iron or non-alloy steel, electro-galvanized |
| 128 | flat-rolled product of stainless steel, electro-galvanized, coated with ethylene propylene diene monomer (EPDM), of a thickness from 0.015 to 0.025 inches inclusive, of a width from 1.265 to 1.796 inches inclusive |
| 129 | flat-rolled product, of stainless steel, of a width of less than 600 mm, of any grade of the 300 Series |
| 130 | rod or wire, of stainless steel, of grade 302, 304 SS, 316, 410 or 410 SS, of specification ASTM A493 or A555, annealed, soap coated, of a diameter from 0.2 inch to 0.672 inch inclusive |
| 131 | flat-rolled product, hot-rolled, heat treated, of grade 4142, of a thickness from 0.25 inch to 12 inches |
| 132 | flat-rolled product of other alloy steel, cold-rolled, galvanized, of specification 50002-LAC550Y620T G160/60 U, of a width of 600 mm or more |
| 133 | flat-rolled product, galvanized, of grade HSLA 50, of a minimum thickness of 0.17 inch |
| 134 | flat-rolled product, galvanized, of grade HSLA 60, of a minimum thickness of 0.085 inch, of a width of 57.15 inches |
| 135 | flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.066, 0.073 or 0.074 inch |
| 136 | flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.083 inch, of a width of 41 inches |
| 137 | flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.085 inch, of a width of 47.266 inches |
| 138 | Flat-rolled product, rough machined and rotary ground, of grade O-1, A2, D2, S7, H13 or M2, of a thickness from 0.25 inch to 12 inches, of a width greater than 600 mm |
| 139 | flat-rolled product, rough machine and rotary ground, of grade M4, M2 or T15, of a thickness from 0.25 inch to 12 inches, of a width of less than 600 mm |
| 140 | flat-rolled product of other alloy steel, cold-rolled, spheroidized and annealed, of grade 4140 or SAE J404 4130, of a thickness from 2.9 mm to 7.1mm inclusive, of a width from 33.78 mm to 245 mm inclusive |
| 141 | flat-rolled product of other alloy steel, not further worked than cold-rolled, of grade ASTM A980 M160 Martinsite (MART), of a width of 7.375 inches, with electrogalvanized coating 40G/40G |
| 142 | flat-rolled product, rough machined and rotary ground, of grade 4140, 4142, O-1, A2, D2, S7, H13, 1V, 3V, 4V, 9V, 10V or 15V, of a thickness from 0.25 inch to 12 inches, of a width of less than 600 mm |
| 143 | flat-rolled product of other alloy steel, galvanized, of specification MS 50002-LAC550Y620T G160/60U, of a thickness of 2.1 mm, of a width of 228.6 mm |
| 144 | High speed steel round bars, turned, peeled or centerless ground, surface finish, of grade M2, M4, M7, T15, M42, Rex 20, Rex 45 or Rex 76, of a diameter of 0.125 inch to 24 inches inclusive |
| 145 | bars and rods of other alloy steel, not further worked than hot-rolled, of alloy 4130, 4140, 4145, 4150, 4320, 4340, 52100, 8620, 8630, 8640 or 9310, vacuum degassed, fine grain, with a section size from 2.5 inches to 10 inches inclusive |
| 146 | Alloy or tool steel round bars, rough turned, peeled or centerless ground, surface finish, of grade O-1, O6, A2, D2, S7, LescoWear, 1V, 3V, 4V, 9V, 10V or 15V, of a diameter of 0.125 inch to 24 inches inclusive |
| 147 | centrifugal cast tube, of alloy SL96L, of an outside diameter of 13 inches, of an inside diameter of 12.625 inches, of a length of 58.56 inches or 65.25 inches |
| 148 | mechanical tubing, of grade 4140, of an outside diameter from 6 inches to 10 inches inclusive, of an inside diameter from 4 inches to 8 inches inclusive, of a wall thickness from 1 inch to 2 inches inclusive |
| 149 | hollow profile, of stainless steel, of specification ASTM A511 |
| 150 | Tube, seamless, of stainless steel, of grade 304, 316, 317 or 347 |
| 151 | tube, cold drawn, stress relieved and annealed, of grade AISI 4140 or 8630, of an outside diameter from 1.25 inches to 2.375 inches inclusive, of an inside diameter from 0.851 inch to 1.476 inches inclusive |
| 152 | tube, seamless, spray metal (SM), of grade AISI 4140 or 8630, of an outside diameter from 1.22 inches to 2.162 inches inclusive, of an inside diameter from 0.851 inch to 1.29 inches inclusive |
| 153 | tube, seamless, quenched and tempered, cold drawn, of grade AISI 4130 or 4140, of an outside diameter from 1.25 inches to 2.375 inches inclusive, of an inside diameter from 0.851 inch to 1.476 inches inclusive |
| 154 | tube, welded, of circular cross-section, electrical metallic tubing, conforming to standard UL 797 |
| 155 | Hydraulic tube, of grade J525 1008 or 1010, specification of ASTM SA/214, of an outside diameter from 0.125 inch to 1.5 inches inclusive, of a minimum yield strength of 25,000 psi |
| 156 | Tube, welded, of stainless steel, of a circular cross-section, of an outside diameter of up to 4.5 inches inclusive |
| 157 | tube, drawn over mandrel (DOM), of square or rectangular cross-section, of grade C1010 or C1026 |
| 158 | Tube, welded, of stainless steel, of square or rectangular cross-section, of specification ASTM A240 |
| 159 | aluminum strip, of grade 5052 H32/34, coated with thermoplastic polyolefin (TPO) and ethylene propylene diene monomer (EPDM), of a thickness of 0.024 inch |
| 160 | Geodesic dome for storage tanks, of aluminum, of a diameter from 20 feet to 125 feet |
| 161 | aluminum coil, of alloy AA3105, painted or coated, of a thickness of 0.019 inch, of a width from 13 inches to 24 inches inclusive |
| 162 | fuel tank, of aluminum, of 43 or 55 gallon, of dimensions of 62 inches by 20 inches by 24 inches, with inner poly fuel cell, with a black powder coat finish |
| 163 | aluminum horseshoes |
| 164 | aluminum bar, rod, tube or profile, of alloy 6105-T5, of a diameter of 3 inches, of a length of 15, 20 or 25 feet |
| 165 | round stainless steel wire, of grade 302 or 304, of a diameter from 0.178 mm to 1.092 mm, nickel coated |
| 166 | rectangular stainless steel wire, of grade 304, of a dimension of 6.35 mm by a dimension of 0.457 mm, nickel coated |
| 167 | square or rectangular stainless steel wire, of grade 301 or 631, of a dimension from 0.089 mm to 18.128 mm by a dimension from 0.305 mm to 5.08 mm, soap coated |
| 168 | tube, welded, of circular cross-section, electrical rigid metal conduit, conforming to standard UL 6 |
| 169 | Flat-rolled product, rough machined and rotary ground, of grade 4140 or 4142, of a thickness from 0.25 inch to less than 5 inches, of a width greater than 600 mm |
| 170 | Alloy or tool steel round bars, rough turned, peeled or centerless ground, surface finish, of grade 4140 HT, P20, L6, or H13, of a diameter of 0.125 inches to 12 inches inclusive |
| 171 | Hot-rolled annealed plate, of grade 4140, of a thickness from 0.25 inch to 12 inches, of a width of more than 24 inches |
| 172 | Alloy steel plate, not in coils, not further worked than hot rolled, of a thickness of 0.25 inch or more, of a width of 23.62 inches or more, of grade 4140 or 4142 |
| 173 | Flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled, with patterns in relief, of specification ASTM A786, of a thickness of 0.075 inch, of a width of 60 inches |
| 174 | Flat-rolled product, of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, in coils, of specification UMG 1035 spheroidized and annealed, of a width of 600 mm or more, of a thickness from 0.0984 inch to 0.126 inch inclusive |
| 175 | Flat-rolled product, of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, in coils, of specification UMG 1050 spheroidized and annealed, of a width of 600 mm or more, of a thickness from 0.0984 inch to 0.122 inch inclusive |
| 176 | Flat-rolled product of iron or non-alloy steel, hot-rolled, pickled and oiled, in coils, of grade 60 class 2B, of specification ASTM A1011, of a thickness from 0.063 inch to less than 0.066 inch, of a width of up to 46.975 inches |
| 177 | Flat-rolled product of iron or non-alloy steel, hot-rolled, pickled and oiled, in coils, of specification SAE J2340 340XF, of a thickness from 0.056 inch to less than 0.058 inch, of a width of up to 55.51 inches |
| 178 | Flat-rolled product of iron or non-alloy steel, hot-rolled, pickled and oiled, in coils, of specification SAE J2340 380XF, of a thickness from 0.055 inch to 0.063 inch inclusive, of a width of up to 57.3 inches |
| 179 | Flat-rolled product, of iron or non-alloy steel, hot-rolled, picked and oiled, in coils, of specification SAE J1392 050XF, of a width of 600 mm or more, of a thickness of 0.0551 inch to 0.063 inch inclusive |
| 180 | High carbon flat-rolled product, hot-rolled, pickled and oiled, of grade 1050, of a width of less than 600 mm, of a thickness from 0.056 inch to 0.26 inch inclusive |
| 181 | Flat-rolled product, of grade 1055/1065, hot-rolled, aluminum killed, one pass (cold-rolled) annealed, of a thickness of 0.22 inch to 0.307 inch (+/- 0.012 inch) inclusive, of a width of 5 inches to 6 inches (+/- 0.020 inch) inclusive |
| 182 | Flat-rolled product, of iron or non-alloy steel, hot-rolled, in coils, of specification UMG 1050 spheroidized and annealed, of a width from 12.85 inches to 23.6 inches, of a thickness from 0.0984 inch to 0.122 inch inclusive |
| 183 | Flat-rolled product of other alloy steel, not further worked than hot-rolled, not in coils, of grade CMS-18 or grade CMS-19 |
| 184 | Flat-rolled product, of grade 4142, of a width from 926 mm to 971 mm inclusive |
| 185 | Flat-rolled product of high speed steel, of a width of less than 600 mm, of proprietary grade Micro-Melt Maxamet, of a thickness from 0.25 inch to 0.458 inch inclusive |
| 186 | Flat-rolled product, of grade 4130, hot-rolled, annealed, of a thickness from 0.157 inch to 0.276 inch (+/-0.007 inch) inclusive, of a width of 2.972 inches to 7.886 inches ( +/- 0.02 inch) inclusive |
| 187 | Flat-rolled product, of grade 8620, hot-rolled, annealed, of a thickness of 0.348 inch ( +/- 0.01 inch), of a width of 5.788 inches (+/-0.02 inch) |
| 188 | Flat-rolled product of other alloy steel, of a width of less than 600 mm, not further worked than hot-rolled, of proprietary grade NiMark 300 Hi temperature alloy, of a thickness from 0.25 inch to 0.458 inch inclusive |
| 189 | Flat-rolled product of other alloy steel, not further worked than hot-rolled, not in coils, of proprietary grade Carpenter CTS XHP, of a thickness from 0.108 inch to 0.32 inch inclusive, of a width of 4 inches to 20 inches inclusive |
| 190 | Flat-rolled product, dual phased steel, in coils, of specification GMW3399M-ST-S-CR590T/340Y-DP-UNCOATED-U, of a width from 1,361 mm to 1,500 mm inclusive, of a thickness of 1.1 mm or 1.2 mm |
| 191 | Flat-rolled product, in coils, cold-rolled, of specification GMW3032M-ST-S-CR420LA, of a thickness of 1.2 mm (+/- 0.06 mm), of a width of 645.414 mm |
| 192 | Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of specification SAE J2340 420XF, of a thickness from 0.052 inch to 0.058 inch inclusive, of a width of up to 50.625 inches |
| 193 | Flat-rolled products of iron or non-alloy steel, in coils, cold-rolled, of specification HSLA SAE J2340 420XF, of a thickness from 0.057 inch to 0.061 inches inclusive, of a width of up to 53.525 inches |
| 194 | Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 060 class 2, of specification ASTM A1011, of a thickness from 0.055 inch to 0.063 inch inclusive, of a width of up to 50.775 inches |
| 195 | Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 060 class 2, of specification ASTM A1011, of a thickness from 0.0295 to 0.035 inches inclusive, of a width of up to 56.475 inches |
| 196 | Flat-rolled product, in coils, cold-rolled, of specification GMW3399M-ST-S-CR780T/420Y-DP-UNCOATED-U, of a width of 622.30 mm, of a thickness of 1.2 mm (+/- 0.06 mm) |
| 197 | Flat rolled product of iron or non-alloy steel, of grade C1022, C1045, C1055, C1060, C1067, C1070, C1074 or C1095, annealed, of specification ASTM A682 or A684, of a thickness of more than 0.0098 inch, of a width of less than 23.625 inches, not clad, plated or coated, not further worked than cold-rolled (cold-reduced) |
| 198 | High carbon flat-rolled product, of grade 1095, of a width of less than 600mm, of a thickness from 0.0098 inches to 0.255 inches inclusive, not further worked than cold-rolled |
| 199 | Flat-rolled product, of grade 1020, cold-rolled, annealed, of a thickness of 0.1595 inch (+/- 0.0015 inch), of a width from 7.663 inches to 8.926 inches ( +/- 0.02 inch) inclusive |
| 200 | Flat-rolled product, of grade 1050, cold-rolled, annealed, of a thickness of 0.157 inch (+/- 0.003 inch), of a width of 4.925 inches (+/- 0.02 inch) |
| 201 | Flat-rolled product, of grade 1018 AK (aluminum killed), cold-rolled, annealed, of a thickness of 0.048 to 0.2155 inch (+/- 0.002 inch) inclusive, of a width from 2 inches to 9.32 inches (+/- 0.02 inch) inclusive |
| 202 | Flat-rolled product, of grade 1018 SK (silicon killed), cold-rolled, annealed, of a thickness of 0.079 inch to 0.174 inch (+/- 0.002 inch) inclusive, of a width of 1.53 inches to 5.8 inches ( +/- 0.01 inch) inclusive |
| 203 | Flat-rolled product, of grade 1020 AK (aluminum killed), cold-rolled, annealed, of a thickness of 0.222 inch (+/- 0.002 inch), of a width of 3.4 inches ( +/- 0.01 inch) |
| 204 | Flat-rolled product, of grade 10B21, cold-rolled, annealed, of a thickness of 0.104 inch to 0.196 inch (+/- 0.006 inch) inclusive, of a width of 1.938 inches to 5.976 inches (+/- 0.02 inch) inclusive |
| 205 | Flat-rolled product of other alloy steel, cold-rolled, of specification high strength-SAE J2340, of grade 380XF CR, of a width of 600 mm or more, of a thickness from 0.045 inch to 0.049 inch inclusive |
| 206 | Flat-rolled product, in coils, of specification 4142 HR, of a width from 36.481 inches to 38.211 inches inclusive, of a thickness from 0.1795 inch to 0.2415 inch inclusive |
| 207 | Flat-rolled product of other alloy steel, of a width of less than 600 mm, not further worked than cold-rolled (cold-reduced), of proprietary grade Hiperco 50 Alloy, of a thickness from 0.001 inch to 0.385 inch inclusive |
| 208 | Flat-rolled product, of grade 4130, cold-rolled, annealed, of a thickness of 0.069 inch to 0.236 inch (+/- 0.006 inch) inclusive, of a width of 1.4 inches to 11.108 inches ( +/- 0.02 inch) inclsuive |
| 209 | Flat-rolled product, of grade 4140, cold-rolled, annealed , of a thickness of 0.118 inch to 0.236 inch (+/- 0.002 inch), of a width of 3.22 inches to 5.551 inches (+/- 0.02 inch) |
| 210 | Flat-rolled product, of grade 8620 or 8620 H, cold-rolled, annealed, of a thickness of 0.093 inch to 0.348 inch (+/-0.002 inch) inclusive, of a width of 2.808 inches to 7.360 inches (+/-0.02 inch) inclusive |
| 211 | Flat-rolled product, cold-rolled, in coils, of specification TSG3100G SPC980DU-T, of a thickness from 0.037 inch to 0.041 inch inclusive, of a width of up to 52.285 inches |
| 212 | Flat-rolled product, of grade 8620, hot-rolled and one pass (cold-rolled), annealed, of a thickness of 0.315 inch (+/- 0.004 inch), of a width of 5.35 inches ( +/-0.02 inch) |
| 213 | Flat-rolled product, of zinc-aluminum-magnesium alloy, of registered trademark ZAM, in coils, of specification ASTM-A1046/A1046M, MSM-CC-DZC 90 or MSM-CE-DZC 120, of a thickness of 0.02 inch to 0.2 inch inclusive, of a width of 32 inches or more |
| 214 | Flat-rolled product of iron or non-alloy steel, galvanized, of specification ASTM A653 SS, of grade 080 G90, of a thickness from 0.044 inch to 0.061 inch inclusive, of a width from 50.655 inches to 55.655 inches inclusive |
| 215 | Flat-rolled product, with polymer coating, of a thickness not exceeding 2.8 mm, of a width not exceeding 863 mm, meeting standard ASTM A929 or CSA G401 |
| 216 | Bar and rod, of ductile cast iron of grade 80-55-06 |
| 217 | Bar and rod, of gray iron or ductile iron continuous cast, of grade 100-760-02, G-2 (class 40 gray iron) or 201-NI-RESIS |
| 218 | Bar and rod, in coils, not further worked than cold-formed or cold-finished, of grade AISI 1010, 1015, 1018, 1020 or 1022, of a diameter from 1.25 inches to 1.47 inches inclusive |
| 219 | Bar and rod, in coils, not further worked than cold-formed or cold-finished, of grade AISI 1045, 10B21 or 8620, of a diameter of more than 1 inch to 1.47 inches inclusive |
| 220 | Bar and rod, not further worked than cold-formed or cold-finished, of grade 1045 or 1050, of a minimum yield strength of 100,000 psi, of specification ASTM A-311, of a diameter from more than 3 inches to 12 inches inclusive |
| 221 | Bar and rod, hot-rolled, in irregularly wound coils, of silico-manganese steel, of grade 300M, of diameter of more than 0.765 inch to 12 inches inclusive |
| 222 | Bar and rod, of silico-manganese steel, of grade 300M–HS, of a diameter from more than 4.062 inches to 12 inches inclusive |
| 223 | Bar and rod, of grade 4330, 4330M or 4330NiMo5VCa4, of minimum yield strength of up to 165,000 psi inclusive, of a diameter from more than 4.062 inches to 12 inches inclusive |
| 224 | Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 4330V MOD, of an outside diameter of 4.75 inches |
| 225 | Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 4145H MOD, of an outside diameter of 5 inches, 8 inches or 8.75 inches |
| 226 | Round bar of alloy steel, of AISI grade E8720Ca4 or E9313-15MCa4, calcium treated, electric furnace forged, vacuum degassed, not further worked than hot-rolled, hot-drawn or extruded, of specifications ASTM A255, ASTM E45 or European Standard EN 10204 |
| 227 | Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade M-50 or 4330V, of a diameter from 0.5 inch to 12 inches inclusive |
| 228 | Bar, of grade SAE 4340, of specification AMS 6414, of a diameter of up to 12 inches inclusive, vacuum remelted, of a kind used in aerospace application |
| 229 | Bar, of grade SAE 52100, vacuum remelted, of specification AMS 6440 or AMS 6444, of a kind used in aerospace application |
| 230 | Bar, of grade AISI 440C, of specification AMS 5618, electrode vacuum remelted, of a kind used in aerospace application |
| 231 | Bar, of grade M50, of specification AMS 6491, vacuum melted and remelted, of a kind used in aerospace application |
| 232 | Bar, of grade M50Nil, of specification AMS 6278, vacuum melted and remelted, of a kind used in aerospace application |
| 233 | Bar and rod, of other alloy or non-alloy steel, not further worked than cold-formed or cold-finished, of proprietary grade Premomax or Biodur Carpenter CCM alloy, of a diameter from 1 inch to 12 inches inclusive |
| 234 | Bar, turned, ground and/or polished, not further worked than cold-formed, cold-drawn or cold-finished, of grade 4140 or 8620, of a diameter from 1.25 inches to 1.5 inches inclusive, of a length of more than 24 feet to 40.2 feet inclusive |
| 235 | Tubes, pipes and hollow profiles, seamless, of stainless steel, of circular cross-section, of grades 15-15LC Mod hollow bar or 15-15HS max hollow bar, of an inside diameter from 2 inches to 10 inches inclusive |
| 236 | Pipe and tube, seamless, of grade 4130, 4130M, 4140, 4140Ca4 or 4145, of an outside diameter of up to 3 inches inclusive, of a wall thickness of up to 0.5 inch inclusive |
| 237 | Electric fusion welded carbon pipe, of specification ASTM A672, of grade C70, of outside diameter of 28 inches, of an inside diameter of 26.5 inches, of a wall thickness of 0.75 inches |
| 238 | Line pipe of a kind used for oil or gas pipeline, drawn over mandrel (DOM), of grade 1026, of an outside diameter of 3 inches, of an inside diameter of 1.75 inches or 2.375 inches |
| 239 | Line pipe of a kind used for oil or gas pipeline, of grade 1026, of an outside diameter of 3.63 inches, of an inside diameter of 3 inches |
| 240 | Tube, welded, of grade AISI 1026, of an outside diameter of 1.9 inches, of a wall thickness of 0.4 inch |
| 241 | Tube, welded, of grade AISI 1526, of an outside diameter from 1.05 inches to 1.9 inches inclusive, of a wall thickness from 0.225 inch to 0.34 inch |
| 242 | Tube, welded, of grade AISI 4140, of an outside diameter of 1.778 or 1.784 inches, of an inside diameter of 1.322 inches or 1.328 inches |
| 243 | Tube, percussion welded (PEW), of specification SAE J526 1005-1010, of an outside diameter of 0.312 inch, of a wall thickness of 0.03 inches |
| 244 | Tube, percussion welded (PEW), of specification SAE J526 1005-1010, of an outside diameter of 0.25 inch, of a wall thickness of 0.035 inch |
| 245 | Pipe and tube, of stainless steel, of an outside diameter of 2 inches, of a wall thickness of 1.5 mm, of specification ASTM A554 |
| 246 | Tubes and pipes, welded, of circular cross-section, of grade 15B27MC, 15B27M, 15B27, 15B30M or 15B34, of a wall thickness from 3 mm to 6 mm inclusive, of a diameter from 20 mm to 40 mm inclusive |
| 247 | Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 1.97 inches by 1.57 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513 |
| 248 | Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 2.36 inches by 1.57 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513 |
| 249 | Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 4.72 inches by 1.57 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513 |
| 250 | Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 4.72 inches by 2.36 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513 |
| 251 | Carbon steel welding wire, of trademark NS-115 CopperFree, of a diameter of 0.035 inch to 0.062 inch inclusive, of specification CSA W48-14 B-G49A 3 C1 S6 |
| 252 | Wire, of mild steel, not clad, of a diameter of 1 mm, of specification AWS A5.18/A5.18M or CSA W48.14 |
| 253 | Oil tempered Class 2 spring wire, of a diameter of more than 0.531 inch |
| 254 | Rub rail of alloy steel, hot-rolled, of grade A529-50, of a height of 2.5 inches, of a width of 0.375 inch, of a length of 24 feet |
| 255 | Hot-rolled structural steel coil, of grade 36 Type 1, of specification ASTM A1011, of a nominal thickness of 0.059 inch, of a width of 59.5 inches |
| 256 | High Carbon steel flat bar, cold-rolled, annealed, of grade 4340, of a thickness of 0.282 inches, of a width of 1 inch |
| 257 | Hot-rolled round bar, of alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 5160 or 5160H, of a diameter of 0.562 inch to 0.748 inch inclusive |
| 258 | Hot-rolled flat bar, of alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 5160 or 5160H, of a thickness from 0.187 inch to 0.236 inch, of a width from 0.499 inch to 1.250 inches inclusive, |
| 259 | Bar of other alloy steel, of specification AMS 5743J or AM-355, water quenched heat treat process, of a diameter of 5.125 inches, with a maximum cobalt content of 0.4% by weight |
| 260 | Bar, hot-rolled, of grade 5160H, of a diameter of 0.5625 inch, 0.59375 inch, 0.625 inch, 0.65625 inch, 0.6875 inch or 0.71875 inch |
| 261 | Bar, hot-rolled, turned and polished, of grade 5160H, of a diameter of 0.875 inch |
| 262 | Bar, hot-rolled, turned and polished, of grade 51B60H, of a diameter of 1.25 inch |
| 263 | Wire of iron or non-alloy steel, of specification ASTM A475, electro galvanized, class A coating, of a thickness from 0.05 inch to 0.25 inch inclusive |
| 264 | Wire of iron or non-alloy steel, of specification ASTM A475, electro galvanized, class B coating, of a thickness from 0.05 inch to 0.25 inch inclusive |
| 265 | Wire of iron or non-alloy steel, of specification ASTM A475, electro galvanized, class C coating, of a thickness from 0.05 inch to 0.25 inch inclusive |
| 266 | Wire of iron or non-alloy steel, of specification ASTM B341, plated with aluminum, of a thickness from 0.09 inch to 0.2 inch inclusive |
| 267 | Wire of stainless steel, nickel coated, of type 304, 304L, 316 or 631, of specification ASTM A313 or ASTM A580, of a diameter of up to 5.75 mm |
| 268 | Rebar, in irregularly wound coils, of stainless steel, of grade 2304 or 2205, of specification ASTM A-955, of a thickness from 0.375 inch to 1.75 inches inclusive , of a yield strength of 65,000 psi |
| 269 | Bar and rod, of stainless steel, hot-rolled, in irregularly wound coils, of grade 25NI-20CR-6MO or 22CR-13NI-5MIN, of specification type 304, type 304L or type 303, of a diameter from 0.12 inch to 0.75 inch inclusive |
| 270 | Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section, of grade SCF 19 alloy, of a diameter from 3.5 inches to 10.5 inches inclusive |
| 271 | Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASME SA-564 type 630 |
| 272 | Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASME SA-638 type 660 |
| 273 | Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASME SA-705 type XM-13 or ASME SA-705 type 630 |
| 274 | Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASME SA-479 type 304L |
| 275 | Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASME SA-540, of grade B21, B22, B23 or B24 |
| 276 | Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASTM A434, of grade BD |
| 277 | Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of grade project 70+ of specification type 304/304L Stainless or project 70+ of specification custom 630 (17CR-4NI), of a diameter from 3.25 inch to 10 inches inclusive |
| 278 | Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grade project 70+ 15CR-5NI stainless, of specification type 34700, type 416 or type 416 RS, of a diameter from 1 inch to 10.75 inches inclusive |
| 279 | Bar and rod, of stainless steel, turned, ground and/or polished, not further worked than cold-formed, cold-drawn or cold-finished, of grade 431 or XM19, of a diameter from 1.25 inches to 1.5 inches inclusive |
| 280 | Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grade 416, of specification ASTM A582, of a thickness from 0.375 inch to 5 inches inclusive |
| 281 | Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section, of grade 2205 or 2304 |
| 282 | Tubes, pipes and hollow profiles, of stainless steel, of circular cross-section, of specification ASTM A-500 Grade C |
| 283 | Pipe and tube, welded, of stainless steel, of grade 18 Cr Cb, of an outside diameter of 2 inches, of a wall thickness of 1.5 mm, of specification ASTM A554 |
| 284 | Pipe and tube, welded, of stainless steel, of grade 439, of an outside diameter of up to 1 inch inclusive, of a wall thickness of up to 1.5 mm inclusive, of specification ASTM A554 |
| 285 | Aluminum I-Beam, of alloy AA6061 |
| 286 | Aluminum bars, rods and profiles, of any alloy of the 7000 series |
| 287 | Aluminum bars, rods, profiles or castings, of aluminum bronze alloy, of specification ASME SB-271, of type C95400 |
| 288 | Aluminum plates, sheets and strip, of alloy AA1350, AA2024, AA 2124, AA2198, AA2219, AA2324, AA2524, AA5052, AA6013 or AA6061 |
| 289 | Aluminum plates, sheets and strip, of any alloy of the 5000 series (including alloy 5052), of temper H32, H32P or H242, of a thickness exceeding 0.2 mm but less than 7 mm |
| 290 | Aluminum plates, sheets and strip, of any alloy of the 7000 series (including alloy 7040, 7050, 7055, 7075, 7085, 7140, 7150, 7175, 7474 or 7475) |
| 291 | Aluminum plates, sheets and strip, pre-painted, of grade 3003 or 5052, of temper H14, H32, or H34 |
| 292 | Aluminum plates, sheets and strip, in coils, of alloy 5042, of temper H2E72 or H25, coated |
| 293 | Aluminum plates, sheets and strip, in coils, of alloy 5352, of temper H2E77, coated |
| 294 | Aluminum plates, sheets and strip, in coils, of alloy 5042 or 5182, of temper H48, coated |
| 295 | Aluminum reservoirs, tanks, vats and similar containers, of alloy AA5052, of a diameter of 12 inches |
| 296 | Aluminum collapsible tubular container, of alloy 1070, whether or not lined or heat-insulated, of a diameter of up to 2 inches inclusive, of a length of up to 8 inches inclusive |
| 297 | Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grade Custom 465, of specification AMS 5936, of a diameter of up to 8 inches |
| 298 | Flat-rolled product, of grade SA 516-70, HIC resistant, vacuum degassed, of a thickness of more than 0.375 inch |
| 299 | Flat-rolled product of iron or non-alloy steel, clad plated or coated with vitreous enamel, of a thickness of more than 0.375 inch |
| 300 | Flat-rolled product of iron or non-alloy steel, electrogalvanized, zinc-nickel coated, HY 100, vacuum degassed, HIC resistant, of a thickness of more than 0.375 inch |
| 301 | Flat-rolled product, of grade SA 516-70, clad, plated or coated with SA 240-317L stainless steel, of a thickness of more than 0.375 inch |
| 302 | Flat-rolled product, Chromoly steel, of grade SA 387-11 Class 2, of a thickness of more than 0.375 inch |
| 303 | Semi-finished product of other alloy steel, in ingots and other primary forms, of grades Aermet 100, 4340, CBS50NIL, 52100 or INVAR 36 Alloy, of a diameter from 1 inch to less than 8 inches |
| 304 | Ingots, of other alloy steel, of specification Electro-Slag Remelting (ESR), of FINKL STEEL proprietary grade MLQ XTRA, DCQ, SDQ, SXQ, 420M, DRX or XFS, of a diameter from 40 inches to 49 inches inclusive |
| 305 | Ingots, of other alloy steel, of specification Vacuum Arc Remelting (VAR), of FINKL STEEL proprietary grade MLQ XTRA, DCQ ,SDQ, SXQ , 420M, DRX or XFS, of a diameter from 40 inches to 49 inches |
| 306 | Semi-finished product of stainless steel, in ingots or other primary forms, of grade 15-15HS MAX, 15-15HS or 15-5, of specification Carpenter Stainless type 15CR-5NI, Carpenter13-8 Stainless type 410 or Custom 630 (17CR-4NI) Stainless, of a diameter from 3.5 inches to less than 8 inches |
| 307 | Semi-finished product of stainless steel, of rectangular (other than square) cross-section, of grade A286, Carpenter custom 465 Stainless or Custom 450 Stainless, of specification type 17-4 or type 17-5, of a width from 7.5 inches to less than 8 inches |
| 308 | Semi-finished product of stainless steel, in ingots or other primary forms, of grade 440C, Pyromet 355 High temperature alloy, 15-15LC MOD or Carpenter Disk Quality VAR 15-5, of a diameter from 1 inch to less than 8 inches |
| 309 | Flat-rolled product of iron or non-alloy steel, not in coils, of grade ASTM A1011 HSLAS-F Grade 80, of a thickness from 0.059 inch to less than 0.071 inch, of a width of up to 20 inches, of a length of up to 120 inches |
| 310 | Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, of grade 1045 SAE J403, of a thickness of 3.89 mm |
| 311 | Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, annealed, of grade SAE J403 1050, of a thickness from 0.0758 inch to 0.111 inch inclusive, of a width from 6.97 inches to 10.2 inches inclusive |
| 312 | Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, annealed, of grade SAE J403 1075, of a thickness from 0.1573 inch to 0.181 inch inclusive, of a width of 5.325 inches |
| 313 | Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1074 SAE J403, of a thickness of 0.69 mm to 3.3 mm inclusive, of a width from 170 mm to 248 mm inclusive |
| 314 | Pipe and tube, straight seam, electric resistance welded, of circular cross-section, of grade 1008 or 1010 steel, Galfan coated or copper plated, of specification ASTM A513, SAE J356 or SAE J526, of an outside diameter from 0.157 inch to 1.375 inches inclusive, of a wall thickness from 0.02 inches to 0.083 inches inclusive |
| 315 | Flat-rolled product, of iron or non-alloy steel, in coils, galvanized, of specification ASTM A653 SS Grade 80 Class 2, of a thickness from 0.057 inch to 0.07 inch |
| 316 | Semi-finished bar, of ductile cast iron, of grade 60-40-18, annealed, of specification ASTM A-395 |
| 317 | Flat-rolled product, hot-rolled, in coils, of grade HSLA 60, of a thickness from 0.05 inch to 0.063 inch inclusive |
| 318 | Flat-rolled product, hot-rolled, in coils, of grade HSLA 70, of a thickness from 0.05 inch to 0.063 inch inclusive |
| 319 | Flat-rolled product, hot-rolled, in coils, of grade HSLA 80, of a thickness from 0.05 inch to 0.063 inch inclusive |
| 320 | Flat-rolled product, cold-rolled, in coils, of grade HSLA 60, of a thickness from 0.02 inch to 0.105 inch inclusive |
| 321 | Flat-rolled product, cold-rolled, in coils, of grade HSLA 70, of a thickness from 0.02 inch to 0.105 inch inclusive |
| 322 | Flat-rolled product, cold-rolled, in coils, of grade HSLA 80, of a thickness from 0.02 inch to 0.105 inch inclusive |
| 323 | Flat-rolled product, cold-rolled, in coils, full hard, not annealed, of grade 1010, of a thickness of 0.0395 inch, of a width of 65.25 inches |
| 324 | Flat-rolled product, cold-rolled, in coils, full hard, not annealed, of grade 1010, of a thickness of 0.0396 inch, of a width of 68.875 inches |
| 325 | Flat-rolled product, cold-rolled, in coils, of grade 4130, of a thickness of 0.075 inch, of a width of 3 inches |
| 326 | Flat-rolled product, cold-rolled, in coils, of grade 1075, of a thickness of 0.134 inch, of a width of 1.437 inches |
| 327 | Flat-rolled product, cold-rolled, in coils, of grade 1050, of a thickness of 0.125 inch, of a width of 2.5 inches |
| 328 | Flat-rolled product, cold-rolled, in coils, of grade 1074, of a thickness of 0.074 inch, of a width of 3.5 inches |
| 329 | Round stainless steel wire, of grade 302, 304 or 316, of a diameter of more than 6.5 mm |
| 330 | Square or rectangular stainless steel wire, of grade 301, 302, 304 or 631, of more than 0.787 square mm in maximum solid cross-sectional area |
| 331 | Aluminum plates, sheets and strip, of alloy 1100, of any alloy of the 5000 series or of any alloy of the 6000 series |
| 332 | Round bar, of other alloy steel, of grade AISI 9310 or 9310-H, fine grain, vacuum degassed, cold drawn, annealed, turned, polished, of specification AMS 6260S |
| 333 | Round bar, of other alloy steel, of grade AISI 9310 or 9310-H, fine grain, vacuum degassed, cold drawn, annealed, turned, polished, of specification ASTM A108 – Level 3 or ASTM A304-11, of a diameter of more than 3.5 inches |
| 334 | Vacuum Insulated Tubing (VIT), seamless, with a thermal conductivity value of less than 0.002 BTU/hr-ft-F, of an outside diameter greater than 177.8 mm, of an inside diameter from 139.7 mm to 168.3 mm inclusive |
| 335 | Vacuum Insulated Tubing (VIT), Electric Resistance Welded, with a thermal conductivity value of less than 0.002 BTU/hr-ft-F, of an outside diameter greater than 177.8 mm, of an inside diameter from 139.7 mm to 168.3 mm inclusive |
| 336 | Pipe and tube, of iron or non-alloy steel, seamless, of grade 1026, of specification ASTM A 519, of an outside diameter of 10 inches, of a wall thickness of 0.5 inch |
| 337 | Tube, of other alloy steel, cold-drawn, seamless, of grade 4130, of specification AMS 6360, of a diameter of 0.75 inch or 1 inch, of a wall thickness of 0.035 inch or 0.156 inch |
| 338 | Pipe, of carbon steel Grade B Type E, with a polymer lining of PTFE (Polytetrafluoroethylene), PVDF (Polyvinylidene), PP (Polypropylene) or PFA (Perfluoroalkoxy), of a diameter of 1 inch to 12 inches inclusive |
| 339 | Round bar of stainless steel, of grade 317L, alloy 20 or alloy 2205 |
| 340 | Carbon wire, in coils, plastic or nylon coated, cold-formed, conforming to standard ASTM F963-07 |
| 341 | Plain end seamless casing, of a kind used to drill and operate gas storage caverns, of an outside diameter of 13.375 inches, of a torque of 79.67 lbs-ft or 91.25 lbs-ft, of specification P110 HC PSL-1 |
| 342 | Flat-rolled product, of specification GMW3032M-ST-S CR180B2 U, of a nominal thickness of 1.5 mm |
| 343 | Flat rolled product, of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, of grade J2340 490XF, of a minimum thickness of 0.046 inch, of a width from 48 inches to 51 inches inclusive |
| 344 | Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade J2340 490XF, of a minimum thickness of 0.055 inch, of a width of 55.51 inches. |
| 345 | Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade J2340 550XF, of a thickness from 0.055 inch to 0.065 inch, of a width from 40 inches to 52 inches |
| 346 | Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade J2340 550XF, of a minimum thickness of 0.068 inch, of a width of 54.675 inches |
| 347 | Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade J2340 420XF, of a minimum thickness of 0.059 inch, of a width of 54.375 inches |
| 348 | Flat-rolled product of non-alloy steel, not further worked than cold-rolled, of grade A506 4130 FP 95% spheroidized and annealed, of a thickness from 0.154 inch to 0.157 inch, of a width from 36 inches to 39 inches inclusive |
| 349 | Flat-rolled product, cold-rolled, annealed, of grade 1074 or 1075, of a thickness of 0.02 inch |
| 350 | Flat-rolled product, in coils, cold-rolled, of grade 060 HSLA, of a thickness of 3 mm, of a width of up to 160 mm |
| 351 | Flat-rolled product, cold-rolled, of specification GMW 3032M-ST-S-CR180B2, of a thickness of 0.0394 inch or 0.75 mm |
| 352 | Flat-rolled product, cold-rolled, of specification GMW 3032M-ST-S-CR420LA, of a thickness of 0.0378 inch or 0.8 mm (+/- 0.05 mm) |
| 353 | Flat-rolled prodyuct, cold-rolled, of specification GMW3032-ST-S-CR550 MPA, of a thickness of 0.0472 inch |
| 354 | Flat-rolled product, cold-rolled, of specification GMW 3399W-ST-S-CR590T/340Y, of a thickness of 0.0241 inch or 0.95 mm |
| 355 | Flat-rolled product, cold-rolled, of specification GMW 3399W-ST-S-CR690T/550Y, of a thickness of 0.045 inch |
| 356 | Flat-rolled product, cold-rolled, of specification MS.50002 LAC420Y480T, of a thickness of 1.7 mm (+/- 0.07 mm) |
| 357 | Flat-rolled product, cold-rolled, spheroidized and annealed, of grade 4130, of a minimum thickness from 0.059 inch to 0.197 inch |
| 358 | Flat-rolled product of non-alloy steel, not further worked than cold-rolled, of grade J2340 420XF, of a minimum thickness of 0.0394 inch, of a width of 53.328 inches |
| 359 | Flat-rolled product of non-alloy steel, not further worked than cold-rolled, of grade GMW3032 CR420, of a minimum thickness of 0.0433 inch, of a width of 49.575 inches |
| 360 | Flat-rolled product of non-alloy steel, not further worked than cold-rolled, of grade GMW3339M-ST-S 980T/700Y, of a thickness from 0.055 inch to 0.075 inch, of a width from 31 inches to 46 inches inclusive |
| 361 | Flat-rolled product of non-alloy steel, not further worked than cold-rolled, of grade J2340 420XF, of a thickness of 0.0591 inch, of a width of 43.839 inches |
| 362 | Flat-rolled product of non-alloy steel, cold-rolled, of grade A506 4130 FP 95% spheroidized and annealed, of a minimum thickness of 0.114 inch, of a width from 36 inches to 39 inches inclusive |
| 363 | Flat rolled product of non-alloy steel, not further worked than cold-rolled, of grade J2340 490XF, of a minimum thickness of 0.035 inch, of a width of 48.4 inches |
| 364 | Flat rolled product of non-alloy steel, not further worked than cold-rolled, of grade GMW3032 CR340, of a minimum thickness of 0.0213 inch, of a width of 51.375 inches |
| 365 | Flat rolled product of non-alloy steel, not further worked than cold-rolled, of grade GMW3032 CR340, of a minimum thickness of 0.0236 inch, of a width of 51.375 inches |
| 366 | Flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, in coils, containing by weight 0.19% of carbon, of specification M190 Martinsite steel, of a thickness from 0.4 mm to 0.6 mm |
| 367 | Flat-rolled product of iron or non-alloy steel, of a width of less than 600 mm, not further worked than cold-rolled (cold-reduced), in coils, of specification S50-260x431000 SAE J403-1050 or S50-260x355000 SAE J403-1050, of a thickness from 2.5mm to 2.7mm inclusive |
| 368 | Flat-rolled product, of iron or non-alloy steel, cold-rolled, annealed, of grade 40 modified, of a thickness of 1.5 mm |
| 369 | Flat-rolled product, of iron or non-alloy steel, in coils, of grade SAE J403 1055, of a thickness from 1.1 mm to 2.2 mm, of a width from 86 mm to 146 mm inclusive |
| 370 | Flat-rolled product, of other alloy steel, not further worked than cold-rolled, of grade GMW3339M-ST-S 980T/550Y, of a minimum thickness of 0.049 inch, of a width from 33 inches to 59 inches inclusive |
| 371 | Flat-roll product, cold-rolled, of grade 4130, of a thickness of 0.04 inch or 0.08 inch, of a width of 36 inches |
| 372 | Flat-rolled product, in coils, cold-rolled, of grade 4130, spheroidized, of a thickness of 2.5 mm, 2.9 mm or 3.5 mm, of a width from 47 mm to 153 mm inclusive |
| 373 | Flat-rolled product, in coils, cold-rolled, of grade SAE J404 4130, of a thickness from 2.5 mm to 4 mm inclusive, of a width from 47 mm to 270 mm inclusive |
| 374 | Flat-rolled product, cold-rolled, annealed, in coils, of grade 4140 or 4142, containing by weight 0.15% or less of chromium, containing by weight 0.05% or less of molybdenum, containing by weight 0.6% to 1.65% of manganese, of a thickness of 1.7 mm (+/- 0.08 mm), of a width from 101.5 mm to 480 mm (+/- 0.5 mm) |
| 375 | Flat-rolled product, of non-alloy steel, hot-rolled, plated or coated with zinc, of grade J1392 Gr70YF or J2340 490YF, of a thickness from 0.068 inch to 0.122 inch inclusive |
| 376 | Flat-rolled product, cold-rolled, in coils, nickel, brass or copper electroplated, of grade ASTM 1008, of a thickness of 0.008 inch to 0.03 inch |
| 377 | Aluminum collapsible tubular container, annealed, with exterior and interior coating, produced by an impact extrusion process |
| 378 | Aluminum aerosol container, annealed, with exterior and interior coating, produced by an impact extrusion process |
| 379 | Flat-rolled product, cold-rolled, of specification GMW3032M CR180B2, of a nominal thickness of 0.0472 inch |
| 380 | Flat-rolled product, cold-rolled, of specification GMW3032M CR210B2, of a minimum thickness of 0.081 inch |
| 381 | Flat-rolled product, cold-rolled, of specification GMW3032M CR270B2, of a minimum thickness of 0.057 inch |
| 382 | Flat-rolled product, cold-rolled, of specification GMW3399M CR780T/420Y, of a nominal thickness of 0.0787 inch |
| 383 | Flat-rolled product, cold-rolled, of specification J404 4130, of a nominal thickness of 0.118 inch or 0.194 inch |
| 384 | Flat-rolled product, cold-rolled, of specification J404 4130, of a minimum thickness of 0.059 inch, 0.138 inch or 0.1575 inch |
| 385 | Flat-rolled product, cold-rolled, galvanized, of specification GMW3032M CR180B2, of a minimum thickness of 0.0307 inch |
| 386 | Flat-rolled product, cold-rolled, galvanized, of specification GMW3032M CR340LA, of a minimum thickness of 0.03 inch |
| 387 | Flat-rolled product, galvanized, of specification J2340 420XF, of a minimum thickness of 0.083 inch |
| 388 | Flat-rolled product, cold-rolled, galvanized, of specification GMW3032M CR420LA, of a minimum thickness of 0.039 inch |
| 389 | Flat-rolled product, hot-rolled, of specification J2340 420 XF, of a minimum thickness of 0.051 inch |
| 390 | Flat-rolled product, hot-rolled, of specification J403 1037 modified, of a minimum thickness of 0.055 inch, 0.059 inch or 0.066 inch |
| 391 | Flat-rolled product, hot-rolled, pickled and oiled, of specification A606 Type 4 Corten, of a minimum thickness of 0.058 inch |
| 392 | Flat-rolled product, hot-rolled, pickled and oiled, of specification J2340 490XF, of a minimum thickness of 0.073 inch or 0.075 inch |
| 393 | Flat-rolled product, hot-rolled, pickled and oiled, of specification GMW3032M HR550LA, of a minimum thickness of 0.078 inch |
| 394 | Flat-rolled product, hot-rolled, pickled and oiled, of specification J2340 550 XF, of a minimum thickness of 0.065 inch, 0.07 inch or 0.075 inch or of a nominal thickness of 0.061 inch |
| Item | Description of Goods |
|---|---|
| 1 | flat-rolled product, not further worked than hot-rolled, of grade 1037, of a minimum width of 47.375 inches |
| 2 | flat-rolled product, cold-rolled, spheroidized, annealed, of grade 4130 |
| 3 | flat-rolled product, cold-rolled, annealed spring steel, of grade SAE 1095 |
| 4 | flat-rolled product, cold-rolled, in coils, spheroidized annealed, of grade 10B21 |
| 5 | flat-rolled product, galvannealed, of grade HSLA 70, of a minimum width of 44.125 inches |
| 6 | flat-rolled product, galvanized, of grade HSLA 70, of a minimum width of 43.29 inches |
| 7 | flat-rolled product, annealed spring steel of grade C1070 CR |
| 8 | Repealed |
| 9 | flat-rolled product, cold-rolled, of AISI 1055 carbon steel |
| 10 | flat-rolled product, cold-rolled, annealed strip steel, of grade C1050 |
| 11 | bar and rod of grade AISI 52100 |
| 12 | I-section beams of iron or non-alloy steel |
| 13 | unequal leg angles with dimensions exceeding 7 inches by 4 inches by 0.5 inch, of iron or non-alloy steel |
| 14 | angle, shape and section, MC channels of a depth exceeding 3 inches |
| 15 | angle, shape and section, C channels of imperial size exceeding C 12 inches by 25 lbs/ft |
| 16 | bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 201, 304, 316, 321, 327, 409, 420, 430 or 450 |
| 17 | flat-rolled product, clad, plated or coated, of grade 4140 |
| 18 | flat-rolled product, clad, plated or coated, of grade 4142 |
| 19 | bar and rod, not further worked than cold-formed or cold-finished, of grade AMS 6425 |
| 20 | pipe and tube, seamless, of grade AISI 1026 |
| 21 | pipe and tube, seamless, of grade AISI 1045 |
| 22 | pipe and tube, of grade AISI 1526M |
| 23 | pipe and tube, seamless, of grade 4140, of circular cross-section |
| 24 | pipe and tube, seamless, of grade 4142, of circular cross-section |
| 25 | pipe and tube, of grade 4140, vacuum degassed, of a minimum yield strength of 80,000 psi, of outside diameter from 3.25 inches to 8 inches inclusive |
| 26 | pipe and tube, welded, of circular cross-section, of grade AISI 1526 |
| 27 | pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 2 inches by 1.5 inches, of grade CSA G40.21, ASTM A252 or ASTM A500 |
| 28 | Repealed |
| 29 | Repealed |
| 30 | Repealed |
| 31 | Repealed |
| 32 | flat-rolled product, not further worked than hot-rolled, of grade CSA G40.21 350W or CSA G40.21 350W Category 1, of a thickness of 3.27 inches or 3.50 inches, of a width of 72 inches or 76 inches, of a length of 544 inches, 550 inches or 552 inches |
| 33 | hot-rolled abrasion resistant plate, of grade 200, of a thickness of 0.25 inches, of a width of 96 inches, of a length of 240 inches or 288 inches |
| 34 | Hot-rolled abrasion resistant plate, of grade 200, of a thickness from 0.3125 inch to 0.313 inch inclusive, of a width of 120 inches, of a length of 240 inches or 288 inches |
| 35 | hot-rolled abrasion resistant plate, of grade 200, of a thickness of 0.625 inches, of a width of 96 inches, of a length of 240 inches or 288 inches |
| 36 | flat-rolled product, of specification GMW3399M-ST-S-CR780T/420Y-DP-UNCOATED-U, of a width of 622.30 mm, of a thickness of 1.2 mm |
| 37 | flat-rolled product, not further worked than cold-rolled, of grade HSLA 80, of a minimum thickness of 0.0756 inch, of a width of 51.975 inches |
| 38 | flat-rolled product, not further worked than cold-rolled, of grade HSLA 60, of a minimum thickness of 0.022 inch, of a width of 52.46 inches |
| 39 | flat-rolled product, not further worked than cold-rolled, of grade HSLA 60, of a minimum thickness of 0.037 inch, of a width of 40.34 or 47.695 inches |
| 40 | flat-rolled product, not further worked than cold-rolled, of grade HSLA 60, of a minimum thickness of 0.0377 inch, of a width of 44 inches |
| 41 | high carbon cold rolled-strip, full hard and oscillated coils, of grade SAE 1035, of a thickness of 0.055 inch, of a width of 0.75 inches |
| 42 | flat-rolled product of iron or non-alloy steel, spheroidized and annealed, of grade SAE J403 C1050 or C1050 SA, of a thickness from 2.9mm to 7.1mm inclusive, of a width from 33.78 mm to 245 mm inclusive |
| 43 | Special Bar Quality (SBQ) bars, of grade AISI C-1536, A-4623-M, C-1541-VM, OP15, A-4320-M, A-4138-M, A-4330-M or A-4142-M, of chemical analysis in accordance with ASTM A751, of tensile strength in accordance with ASTM A370, of hardness in accordance ASTM E18, of a diameter from 0.625 inches to 1.5 inches inclusive, of a length from 25 feet to 30.2 feet inclusive |
| 44 | Round bar, of grade C1045, of a diameter from 0.375 inches to 10 inches inclusive, turned ground and polished (TG&P), of a minimum tensile strength of up to 100,000 psi |
| 45 | Round bar, of grade C1045, turned and polished (TP), of a diameter of 0.375 inch to 10 inches inclusive |
| 46 | bar and rod, of grade 1537M, 4119M or 4318M, of a diameter from 19.05 mm to 30.16 mm inclusive |
| 47 | Bar and rod, of grade 4330, 4330M or 4330NiMo5VCa4, of minimum yield strength of up to 165,000 psi inclusive, of a diameter from 1 inch to 4.062 inches inclusive |
| 48 | Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 4330V MOD, of an outside diameter of 2.5 inches or 3.25 inches |
| 49 | Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 4145H MOD, of an outside diameter of 2.875 inches |
| 50 | Angle, of iron or non-alloy steel, L section, not further worked than hot-rolled, hot-drawn or extruded, of grade A588-B, of a height of less than 3.15 inches, of leg dimensions of 3 inches by 2.5 inches, of a thickness of 0.375 inch, of a length of 20 feet |
| 51 | Aluminum bars, rods and profiles, of aluminum alloy AA2024 or AA2196 |
| 52 | Flat-rolled product of iron or non-alloy steel, not in coils, of grade ASTM A1011 HSLAS-F Grade 80, of a thickness from 0.071 inch to 0.079 inch inclusive, of a width of up to 20 inches, of a length of up to 120 inches |
| 53 | Cold drawn round bar of alloy steel, of grade AISI 4140, of specification ASTM A193, ASTM A320 or MS-101, of a diameter from 0.446 inch to 2.914 inches inclusive |
| 54 | Bar of plain carbon steel, hot-rolled, in irregularly wound coils or not, of specification G30.18 400R, of an outside diameter from 10 mm to 35 mm inclusive, of a yield strength of 400 MPa, of a tensile strength of 540 MPa |
| 55 | Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, of grade SAE 1035 modified, of a thickness from 0.098 inch to 0.118 inch, of a width from 40 inches to 51.5 inches inclusive |
| 56 | Flat-rolled product, hot-rolled, of specification JSH270E, of a thickness of 0.0985 inch |
| 57 | Flat-rolled product, cold-rolled, of specficiation GMW3032M-ST-S CR210B2, of a thickness of 0.0614 inch |
| 58 | Flat-rolled product, cold-rolled, of specification GMW2M CR5, of a minimum thickness of 0.055 inch or 0.06 inch |
| 59 | Flat-rolled product, cold-rolled, of specification J403 10B21, of a minimum thickness of 0.079 inch or 0.115 inch or of a nominal thickness of 0.12 inch |
| 60 | Flat-rolled product, cold-rolled, galvanized, of specification GMW3032M CR420LA, of a minimum thickness of 0.035 inch |
| 61 | Flat-rolled product, galvanized, of specification J2340 490XF, of a minimum thickness of 0.0448 inch or 0.074 inch or of a nominal thickness of 0.079 inch, 0.09 inch or 0.094 inch |
| 62 | Flat-rolled product, galvannealed, of specification A653 HSLAS Grade 70, of a minimum thickness of 0.045 inch |
| Item | Business Number | Description of Goods | Period | Conditions |
|---|---|---|---|---|
| 1 | 100317619 | Flat-rolled product of non-alloy steel, hot-rolled | From from July 1, 2018 to August 31, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form): 10819401244311 10819401253950 10819401253949 10819401260891 10819401174636 10819401300047 10819401300684 10819401300515 10819401300504 10819401300526 10819401319969 10819401325570 10819401325455 10819401298599 |
| 2 | 861611671 | Flat-rolled product of non-alloy steel, hot-rolled | From July 1, 2018 to August 31, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form): 10819401263440 10819401266283 10819401233513 10819401234558 10819401264806 10819401265578 10819401261073 10819401261062 10819401299727 |
| 3 | 869553560 | Bars and rods, hot-rolled, in irregularly wound coils, of iron, non-alloy or other alloy steel, of grade 1006, 1008, 1012, 1015, 1018, 1030, 1042, 1053, 1055, 1057, 1063, 1067, 1070, 1072 or 1077, of a diameter from 5.5 mm to 16 mm inclusive | For goods imported on or after July 1, 2018 | For use in manufacturing of steel wire |
| 4 | 105120190 | Flat-rolled product of iron or non-alloy steel, not in coils, not further worked than hot-rolled, of a width of 120 inches, of a length of 370 inches, of a thickness of 10, 11, 14 or 17 mm, of grade CSA G40.21 260 WT | From July 1 to August 31, 2018 inclusive | Goods ordered under Purchase Order Number 025578 dated May 17, 2018 |
| 5 | 864474002 | Flat-rolled product of iron or non-alloy steel, steel shim stock, of a thickness of 0.008 inches | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 6 | 864474002 | Flat-rolled product, not in coils, hot-rolled, of specification MIL-STD-12560, MIL-STD-12560 Class 1, MIL-STD-46100, CMS18 or CMS 19 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 7 | 864474002 | Flat-rolled product, of specification QT 100 (GD)LS (ASTM A514), of a thickness from 1.25 inches to 4.5 inches inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 8 | 864474002 | Tube, hot-rolled, of specification ASTM A519, of Grade 1026 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 9 | 864474002 | Aluminum angle of grade 6061T6 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 10 | 819484965 | Aluminum bar of alloy 6082 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 11 | 819484965 | Bars and rods, hot-rolled, in irregularly wound coils, of grade 30MnVS6, 1008 MOD, 1018, 1038, 1541, 5140, 5140 H or 8615 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 12 | 819484965 | Bars and rods, not further worked than cold-formed or cold-finished, of grade 30MnVS6, 1008 MOD, 1018, 1038, 1541, 5140, 5140 H or 8615 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 13 | 896301165 | Flat-rolled product of iron, non-alloy or other alloy steel, not further worked than hot-rolled or cold-rolled, of grade 080XLF, 10B21, 1018, 1018 AK, 1018 SK, 1020, 1020 AK, 1050, 1055/1065, 4130, 4140, 8620, 340 XF, 420 XF, 550 XF or SPFH 590 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 14 | 874527823 | Flat-rolled product of iron, non-alloy or other alloy steel, not further worked than cold-rolled, of grade 1018 AK, 1018 SK, 1020 AK, 1050, 420 XF, 550 XF, 4130 or 8620 | From July 1, 2018 to November 14, 2018 inclusive | For use in the manufacture of original equipment parts or other parts |
| 15 | 870249414 | Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade 080 XLF, 420 XF or 550 XF | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 16 | 710327693 | Flat-rolled product of iron, non-alloy or other alloy steel, not in coils, not further worked than hot-rolled | From July 1, 2018 to August 31, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form): 12997083757544 12997083763018 12997732964952 12997231529029 12997083816818 |
| 17 | 894699818 | Square bar, round bar or angle, of grade A588 | From July 1, 2018 to August 31, 2018 inclusive | For imports recorded under the following transaction number (B3-3 Form): 17863105499904 |
| 18 | 894699818 | Tube of square or rectangular cross-section, welded | From July 1, 2018 to August 31, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form): 17863105478362 17863105491882 |
| 19 | 894699818 | Tube of circular cross-section | From July 1, 2018 to August 31, 2018 inclusive | For imports recorded under the following transaction number (B3-3 Form): 17863105502271 |
| 20 | 100763440 | Flat-rolled product of iron, non-alloy or other alloy steel, not further worked than hot-rolled, pickled or cold-rolled, of specification MS66, MS67, MS6000, SCGA CR GA 270, MS.50002, SPH HR 590, GMW CR 340, GMW CR CR3¸ GMW CR 420, GMW HR HR1 or GMW CR 340 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 21 | 100763440 | Flat-rolled product of iron, non-alloy or other alloy steel, clad, plated or coated, of specification MS6000, MS.50002, M2020, M2027, SCGA GN DQ SK, SCGA GN EDDQ AK, GMW CR 420, GMW HR HR1 or GMW CR 340 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 22 | 100763440 | Aluminum plates, sheets and strip, of alloy AA3004 or AA5000 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 23 | 100874247 | Flat-rolled product of iron, non-alloy or other alloy steel, not further worked than hot-rolled, pickled or cold-rolled, of specification MS 67, MS264, MS6000 or MS.50002 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 24 | 100874247 | Flat-rolled product of iron, non-alloy or other alloy steel, clad, plated or coated, of specification MS6000, MS.50002 or GMW CR | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 25 | 100874247 | Aluminum plates, sheets and strip, of alloy AA3004 or AA6000 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 26 | 899313571 | Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, pickled or cold-rolled, of specification SPH HR 370, SPH HR 440 or MS 67 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 27 | 899313571 | Flat-rolled product of iron, non-alloy or other alloy steel, clad, plated or coated, of specification MS6000 or GMW CR | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 28 | 107304340 | Flat-rolled product of iron, non-alloy, other alloy or stainless steel, not further worked than hot-rolled, pickled or cold-rolled, of specification MS66, MS67, MS264, GMW HR 340, SPC CR DQ SK, M1142, M2020, MS.50002, MS6000, SCGA GN DQ AK, SP GN DQ, GMW CR 270, GMW HR HR1 or M2020 CR | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 29 | 107304340 | Flat-rolled product of iron, non-alloy or other alloy steel, clad, plated or coated, of specification MS6000, MS.50002, GMW CR, GMW HR, MS66, MS67, MS264 or SCGA GN | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 30 | 107304340 | Aluminum plates, sheets and strip, of alloy AA3004, AA5000, AA6016, AA6061 or A93003 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 31 | 100086768 | Flat-rolled product of iron or non-alloy steel, cut to length or configured blank, flat polished and/or treated with zinc phosphate and lube | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts |
| 32 | 123307597RM0020 | Flat-rolled product, not further worked than hot-rolled, of specification MS66 or MS.50002 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 33 | 123307597RM0020 | Flat-rolled product, clad, plated or coated, of specification GA6M55V 590 DT, GA6M66 HR 11, 6M66V 050XK, MS.50002, MS264 or GMW3032M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 34 | 123307597RM0020 | Aluminum plates, sheets and strip, of specification MS-5007 5052-H32 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 35 | 123307597RM0013 | Flat-rolled product, not further worked than hot-rolled, of specification MS50002, 6M55V035SK or 6M55HR12 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 36 | 123307597RM0013 | Flat-rolled product, galvanized, of specification MS.50002, MS-6000 or WSD-1A333-A2 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 37 | 123307597RM0013 | Flat-rolled product, not further worked than cold-rolled, of specification MS50002 or M1A333-A2 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 38 | 123307597RM0013 | Hollow profile of aluminum, of alloy 6061 T6, of specification ASTM B221 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 39 | 123307597RM0013 | Aluminum plates, sheets and strip, of specification 5052-H32-GMW15935M-AL-S-5000A-O or 5052-H32 GMW15192M-AL-S-5000-ST-90-U | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 40 | 123307597RM0013 | Aluminum castings of alloy A356-T6 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 41 | 123307597RM0033 | Flat-rolled product, hot-rolled, galvanized, of specification 6M55V-060, 50002, MS-6000, hot-rolled 060XK or LAX420Y480T | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 42 | 123307597RM0033 | Flat-rolled product, not further worked than cold-rolled, of specification MS-264-60XK or MS-264-35XK | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 43 | 123307597RM0033 | Tube, of iron or non-alloy steel, welded, of circular cross-section, of specification 22MnB5 M | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 44 | 123307597RM0033 | Hollow profile of aluminum, of alloy 6061 T6, of specification ASTM B221 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 45 | 123307597RM0023 | Flat-rolled product of non-alloy or other alloy steel, galvanized, of a width of 26.38, 28.74, 37.205 or 32.125 inches | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 46 | 123307597RM0023 | Flat-rolled product, not further worked than hot-rolled, of a width of 10.18, 10.275 or 23.307 inches | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 47 | 123307597RM0023 | Flat-rolled product, not further worked than cold-rolled, of a width of 11.875 inches | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 48 | 123307597RM0023 | Flat-rolled product, galvanized, of a width of 9.5, 17.559 or 20.866 inches | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 49 | 123307597RM0029 | Flat-rolled product, not further worked than cold-rolled, of a boron and manganese alloy | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 50 | 123307597RM0029 | Flat-rolled product, high strength low alloy steel, hot-rolled or cold-rolled, galvanized | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 51 | 123307597RM0029 | Flat-rolled product, low carbon mild steel coil, with hot dipped galvanneal zinc coating | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 52 | 123307597RM0019 | Flat-rolled product of other alloy steel, not further than cold-rolled, of a thickness of 0.89 mm, 1.33 mm or 1.65 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 53 | 123307597RM0019 | Flat-rolled product of other alloy steel, electrolytically or otherwise plated or coated with zinc, of a thickness from 0.66 mm to 2.86 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 54 | 123307597RM0019 | Flat-rolled of other alloy steel, not further worked than hot-rolled, of a thickness of 2.514 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 55 | 123307597RM0019 | Aluminum plates, sheets and strip, of aluminum alloys, not clad, of a thickness from 0.97 mm to 1.94 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 56 | 123307597RM0022 | Flat-rolled product, low carbon steel, cold-rolled, of specification MS-67 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 57 | 123307597RM0022 | Flat-rolled product, cold-rolled, dual-phase or martensitic steel, electrogalvanized, of specification GMW3399M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 58 | 123307597RM0022 | Flat-rolled product, cold-rolled, dual phase or mild steel, galvanized, of specification MS.50002 or GMW3399M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 59 | 123307597RM0022 | Flat-rolled product, not further worked than cold-rolled, multi-phase or mild steel, of specification GMW3399M-ST-S or MS-67 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 60 | 123307597RM0022 | Flat-rolled product, cold-rolled or hot-rolled, dual-phase, multi-phase or mild steel, electrogalvanized or galvanized, of specification MS.50002, GMW3399M-ST-S or GMW3032M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 61 | 123307597RM0022 | Aluminum plates, sheets or strip, of alloy 6111-T4, of specification WSB-M2A152-A1 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 62 | 123307597RM0030 | Flat-rolled product, not further worked than cold-rolled, of grade bake hardenednable, of a nominal thickness of 0.0394 or 0.0472 inches | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 63 | 123307597RM0030 | Flat-rolled product, cold-rolled, of low carbon, high strength low alloy or dual phase steel, hot dipped with galvanneal zinc coating, of a nominal thickness from 0.0276 inches to 0.1575 inches inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 64 | 896543659RM0006 | Flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, of grade 1020, of a thickness of 2.4384 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 65 | 896543659RM0014 | Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, of grade SAE J403 1010 or SAE J403 1022 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 66 | 849292990 | Bars and rods, hot-rolled, in irregularly wound coils, of grade 9254, SUP12MT or HDS12, of a diameter from 11.9 mm to 17.9 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 67 | 849292990 | Bars and rods, not further worked than hot-rolled, hot-drawn or extruded, of grade 5160, of a diameter from 19 mm to 40 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 68 | 849292990 | Tubes and pipes, welded, of circular cross-section, of grade 15B27MC, 15B27M, 15B27, 15B30M or 15B34, of a wall thickness from 3 to 6 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 69 | 846263531 | Semi-finished tubes of iron or steel, of an outside diameter of 4.5 inches to 7 inches inclusive or of an outside diameter of 9.625 inches, of a kind used in production of finished casing and tubing for oil or gas | For goods imported on or after July 1, 2018 | Goods supplied by affiliated company |
| 70 | 104546718 | Flat-rolled product, in coils, galvanized, of specification ASTM A653 Grade 55 | For goods imported on October 1, 2018 or after | Goods ordered under purchase number:
|
| 71 | 104546718 | Flat-rolled product, in coils, galvanized, of specification 50002-DPC420Y780T | For goods imported on or after November 1, 2018 | Goods ordered under purchase order number:
|
| 72 | 104546718 | Flat-rolled product, in coils, galvanized, of designation Extra Deep Drawing Steel (EDDS) | For goods imported on November 1, 2018 or after | Goods ordered under purchase order number:
|
| 73 | 104546718 | Flat-rolled product, in coils, galvanized, of specification 50002-LAC340Y410T | For goods imported on September 1, 2018 or after | Goods ordered under purchase order number:
|
| 74 | 104546718 | Flat-rolled product, in coils, galvanized, of designation Deep Drawing Steel (DDS) | For goods imported on October 4, 2018 | Goods ordered under purchase order number 27279 (May 1, 2018) - imported under transaction number (B3-3 Form) 13177192100313 |
| 75 | 104546718 | Flat-rolled product, in coils, galvanized, of designation Commercial Steel (CS) Type B 1006 | For goods imported on or after December 1, 2018 | Goods ordered under purchase order number 27167 (April 10, 2018) – to be imported |
| 76 | 104546718 | Flat-rolled product, in coils, galvanized, of specification GMW3032M-ST-S 500LA | From August 1, 2018 to September 30, 2018 inclusive | Goods ordered under Purchase Order Number 27334 (May 16, 2018) - imported under any of the following transaction numbers (B3-3 Form): 13177190728943 13177191379943 13177191930996 13177191944060 |
| 77 | 104546718 | Flat-rolled product, in coils, galvanized, of specification SAE J2340 550XF | From August 1, 2018 to September 30, 2018 inclusive | Goods ordered under Purchase Order Number 27359 (May 24, 2018) – imported under the following transaction number (B3-3 Form): 13177315258407 13177191780096 |
| 78 | 105492664 | Flat-rolled product, galvanized or galvannealed, of specification GMW3032M-ST-S, GMW3399W-ST-S, MS-50002, MS-6000 or HR660Y760T-CP | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 79 | 105492664 | Flat-rolled product, not further worked than cold-rolled, of specification WSS-M1A365-A11, WSS-M1A365-A13, WSS-M1A367-A36, WSD-M1A333-A2 or GMW3032M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 80 | 105492664 | Flat-rolled product, not further worked than hot-rolled, of specification WSS-M1A354-A20, WSD-M1A333-A1, WSS-M1A365-A20, WSS-M1A365-A22, WSS-M1A365-A23, WSS-M1A367-A46, JSH270E, MS-6000, HR PO CQ 66, HR PO DQ 66, HR PO DQ AK 66, HR660Y760T-CP, SAEJ403, MS66, HR660Y760T-CP, MS.50002 or 6M44VA | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 81 | 105492664 | Aluminum plates, sheets and strip, of alloy 6022-T4 or 1100 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 82 | 105492664 | Aluminum extrusion | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 83 | 105492664 | Tube, welded, of circular cross-section, of an outside diameter from 0.787 inch to 3.125 inches inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 84 | 132644584 | Flat-rolled product, not further worked than cold-rolled, of specification GMW3032M-ST-S-CR420LA | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 85 | 132644584 | Flat-rolled product, galvanized, of specification GMW3399M-ST-S-CR780T/420Y-DP-HD60G60G-U, of a width of 241.30 mm or 472.44 mm, of a thickness of 1.2mm (+/- 0.6 mm) | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 86 | 132644584 | Flat-rolled product, of specification GMW3399M-ST-S-CR780T/420Y-DP-UNCOATED-U, of a width of 622.30 mm, of a thickness of 1.2mm (+/- 0.6 mm ) | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 87 | 132644584 | Flat-rolled product, galvanized, of specification GMW3399M-ST-S-CR980T/700Y-MP-LCE EG60G60G-U, of a width of 1187.45 mm, of a thickness of 1.2mm (+/- 0.6 mm) | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 88 | 132644584 | Flat-rolled product, galvanized, of specification 50002-LAC550Y620T G160/60 U, of a width of 228.60 mm or 647.70 mm, of a thickness of 2.10 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 89 | 104708409 or 809569957 | Flat-rolled product of iron or non-alloy steel, not in coils, not further than hot-rolled, of classification DNV-GL Grade A, DNV-GL Grade A36, DNV-GL Grade D or DNV-GL Grade D36 | From July 1, 2018 to June 30, 2019 inclusive | |
| 90 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, not further than cold-rolled, of grade SAE J2340 CR550XF | From July 1, 2018 to December 31, 2018 inclusive | For use in the manufacture of original equipment parts or other parts |
| 91 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, not further than cold-rolled, of grade SPC 980 DU-T | From July 1, 2018 to December 31, 2018 inclusive | For use in the manufacture of original equipment parts or other parts |
| 92 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, not further than cold-rolled, of grade 4130 annealed | From July 1, 2018 to December 31, 2018 inclusive | For use in the manufacture of original equipment parts or other parts |
| 93 | 861435121 | Flat-rolled product, not further worked than hot-rolled, of specification MS-264-S-060XF, of a nominal thickness of 3 mm to 4 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 94 | 861435121 | Flat-rolled product, not further worked than cold-rolled, of specification MS-67-S-DDQ CR06 Grade, of a nominal thickness of 0.76 or 0.8 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 95 | 861435121 | Flat-rolled product, not further than hot-rolled, of specification GMW 3032M-ST-S-HR420 LA, of a nominal thickness of 2.5 mm or 3.5 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 96 | 861435121 | Flat-rolled product, not further worked than cold-rolled, of specification GMW 3032M-ST-S-CR340 LA | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 97 | 861435121 | Flat-rolled product, not further worked than cold-rolled, of specification GMW 3032M-ST-S-CR420 LA, of a nominal thickness from 0.5 mm to 0.8 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 98 | 861435121 | Flat-rolled product, not further worked than cold-rolled, of specification SAE J2340 340 XF, of a nominal thickness of 0.8 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 99 | 861435121 | Flat-rolled product, not further worked than cold-rolled, of specification ASTMA 1008A DDS | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 100 | 897264149 | Flat-rolled product, of non-alloy steel, not further worked than hot-rolled, pickled and oiled, of specification MS-264-035-SK or MS-66-CQ | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 101 | 897264149 | Flat-rolled product, of non-alloy steel, not further worked than cold-rolled, pickled and oiled, of specification MS-264-080-XK | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 102 | 897264149 | Flat-rolled product, of other alloy steel, plated or coated with zinc, of specification MS-6000-99V-040SK | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 103 | 867876195 | Flat-rolled product, of non-alloy steel, not further worked than cold-rolled, pickled and oiled, of specification MS-264-050-XK | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 104 | 867876195 | Flat-rolled product, of non-alloy steel, plated or coated with zinc, of specification MS-6000-55V-080XK | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 105 | 867876195 | Flat-rolled product, of other alloy steel, plated or coated with zinc, of specification MS-6000-55V-590DT, MS-6000-44A-DQ or MS-6000-55V-780TT | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 106 | 897419461 | Flat-rolled product, of non-alloy steel, plated or coated with zinc, of specification MS-6000-55E-CR02 or MS-6000-99V-050XK | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 107 | 897419461 | Flat-rolled product, of other alloy steel, plated or coated with zinc, of specification MS-6000-44VA-080XK, MS-6000-55PE-CR02, MS-6000-44A-DDQ, MS-6000-44A-DQ, MS-6000-55E-CR02, MS-6000-55V-690TT or MS-6000-55V-590DT | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 108 | 865927362 | Aluminum profiles, of aluminum alloy | From July 1, 2018 to November 30, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form): 16865819296413 16865819296015 16865819296037 16865819305880 16865819316941 16865819323699 16865819325533 16865819326578 16865819340224 16865819357781 16865819363142 16865819367339 16865819367545 16865819383317 16865819387059 16865819388061 16865819400078 16865819407634 16865819414940 16865819415111 16865819422611 16865819425055 16865819447186 16865819455791 16865819469456 |
| 109 | 121306914 or 718999485 | Flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, of specification 50002-CR02, 50002-CR04, 50002-DPC330Y590T, 50002-DPC340Y590T, 50002-HR13, 50002-LAC340Y410T, 11250 LAC 340Y410T, 5000-LAC550Y620T, 50002-LAH340Y410T, 50002-LAH550Y620T, 50002-TRC400Y690T or DDS 60G60G GA 6M55 CR04 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 110 | 121306914 or 718999485 | Flat-rolled product of iron or non-alloy steel, plated or coated with zinc, of specification 50002-CR02, 50002-CR04, 50002-DPC420Y780T, 50002-LAC550Y620T or 5002-TRC400Y690T | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 111 | 121306914 or 718999485 | Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of specification 50002-LAC340Y410T | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 112 | 121306914 or 718999485 | Flat-rolled product of iron or non-alloy steel, clad, plated or coated, of specification 50002-LAC340Y410T, 50002-LAH340Y410T or 50002-LAH550Y620T | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 113 | 121306914 or 718999485 | Tube or pipe, welded, of circular cross-section, of other alloy steel, of specification 50002-DPC420Y780T | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 114 | 121306914 or 718999485 | Flat-rolled product of other alloy steel, not further worked than cold-rolled, of specification M2032 RP153-980 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 115 | 121306914 or 718999485 | Flat-rolled product of other alloy steel, of specification GN DQ AK or MS 6000 D 44A CHG AF | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 116 | 100355437 | Tube, pipe or hollow profile, of stainless steel, of circular cross-section, welded or seamless, of grade 304L, of specification SAE J405/ASTM A240 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 117 | 100355437 | Tube, pipe or hollow profile, of iron or non-alloy steel, welded, of circular cross-section, of grade 1008 or 1010, of specification TSG3150G/ASTM A513, SAE J403, SAE J525 or SAE J526 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 118 | 101238244 | Aluminum plates, sheets and strip, of alloy 2024, 6061 or any alloy of the 7000 series (including alloy 7040, 7050, 7055, 7075, 7150, 7175 or 7474) | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 119 | 101238244 | Flat-rolled product, of grade Inconel 625 or Inconel 718 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 120 | 101238244 | Bar and rod, of grade Inconel 625 or Inconel 718 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 121 | 100618719 | Aluminum windows | For goods imported on October 27, 2018 | For imports recorded under the following transaction number (B3-3 Form): 13284639341882 |
| 122 | 897270096 | Aluminum doors or windows | From July 1, 2018 to July 31, 2018 | For imports recorded under the following transaction number (B3-3 Form): 12997492696978 |
| 123 | 105347918 | Bar and rod, not further worked than cold formed or cold finished, of other alloy steel, of 5150M grade steel | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 124 | 105347918 | Bar and rod, of iron or non-alloy steel, of SAEJ403 1050 grade steel | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 125 | 866465701 | Aluminum expansion joint covers | From August 3, 2018 to October 6, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form): 10215811360847 10215811545543 10215811682367 |
| 126 | 866465701 | Aluminum expansion joint covers (models SBP-4-8-SP, HDNBL-2-4G, 6GW-4-8G, SBPL-4-8-SP, NBAF-6G, HDNB-2-4, CMX-4-8, CMX-2-4, CMX-6, CMXL-2-6, CMXL-3-6 or CMXL-4-8) or fire barrier insulation fiber (models 2HFFB-12, 2HFFB-9, 2HWFB-12 or 2HWFB-9) | From July 1, 2018 to March 31, 2019 inclusive | Goods purchased to fulfill subcontract 40467-2797-C dated December 1, 2017 |
| 127 | 865908990 | Bar and rod, round, of grade 1215, of specification ASTM A29 or ASTM A108 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 128 | 865908990 | Bar and rod, round, of grade 1144 stress proof, of specification ASTM A29, ASTM A108 or ASTM A311 Class B | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 129 | 100174457 | Aluminum, doors or windows, and their frames | From July 8, 2018 to September 2, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form): 10215811289439 10215811310631 10215811381604 10215811439123 10215811461086 10215811495849 |
| 130 | 105507719 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated, of a thickness of less than 3 mm, hot dipped, Grade X | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 131 | 868987363 or 105507719 |
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, electrolytically plated or coated with zinc, of grade 40-60 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 132 | 868987363 or 105507719 |
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated with zinc, of a thickness exceeding 1 mm, galvanized, of grade 40-60 Series: 316/317/327/330/341/342/344/625/627/629-CR | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 133 | 105507719 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, of part codes 262587P-01-03 .315 X 15.35, MS-264<S>035SK CHG or MS-6000<D>44VA-080XK | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 134 | 105507719 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, not further worked than cold-rolled (cold-reduced), of grade 60 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 135 | 868987363 or 105507719 |
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, galvanized, of grade 50-60 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 136 | 105507719 | Flat-rolled products of other alloy steel, of a width of 600 mm or more, galvanized, of grade 60 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 137 | 868987363 or 105507719 |
Flat-rolled products of other alloy steel, galvanized, of grade 60 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 138 | 105507719 | Flat-rolled products of other alloy steel, of a width of less than 600 mm, not further worked than hot-rolled, of grade 50 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 139 | 105179758 | Bar and rod, Gray Iron and Ductile Iron Continuous Cast Dura-Bar, of grade 65-45-12, 80-55-06, 100-760-02 or 201-NI-RESIS | From July 1, 2018 to June 30, 2019 inclusive |
|
| 140 | 122615503 | Single Walled Steel Tubing with 5% Aluminum Zinc Coating, meeting GM124M/GMW17334 requirements | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 141 | 122615503 | Plain Annealed Single Walled Steel Tubing, meeting GM124M/GMW17334 requirements | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 142 | 122615503 | Single Walled Cut to Length Steel Tubing with 5% Aluminum Zinc Coating, meeting GM124M/GMW17334 requirements | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 143 | 806775540 | Pipe, polymer lined carbon steel, of polymer liner PTFE (Polytetrafluoroethylene), PVDF (Polyvinylidene), PP (Polypropylene) or PFA (Perfluoroalkoxy) | From July 1, 2018 to February 28, 2019 inclusive | |
| 144 | 101400760 | Bar and rod, alloy solid steel bar, cold-rolled, of AMS or BMS specification | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 145 | 101400760 | Bar and rod, of stainless steel, hot-rolled, of AMS or BMS specification | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 146 | 101400760 | Bar and rod, of stainless steel, 321 Stainless Steel, of a diameter greater than 25mm, of AMS or BMS specification | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 147 | 101400760 | Aluminum alloy plate or billet, of AMS or BMS specification, of a thickness greater than 7mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 148 | 101400760 | Manifold Body Castings, of C355-T6 Aluminum | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 149 | 101400760 | Aluminum bar and rod, of specification AMS or BMS, of a diameter greater than 12.7 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 150 | 101400760 | Aluminum tubing, of alloy 7075 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 151 | 866460074 | Flat-rolled product, hot-rolled or cold-rolled, spheroidized and annealed, of grades J403 1045, J403 1050, J404 4140, J404 4130 or A506 4130 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 152 | 895418499 | Flat-rolled product of iron or non-alloy steel, of a width of 600mm or more, hot-rolled, not clad, plated or coated, of a thickness of 4.75mm or more, of specification SPH440-OD or SPH590-OD | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 153 | 895418499 | Flat-rolled product of iron or non-alloy steel, of a width of 600mm or more, cold-rolled, not clad, plated or coated, of a thickness exceeding 0.5mm but less than 3mm, of specification SPC270C, SPC270DU, SPC440, SPC590 or SPC590DU | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 154 | 131874299 | Structures and parts of structures, of aluminum, of model number 750-BL, 750-BR, 550-BL, 550-BR, OR-20, BIB14-MI, BIB14-ML or BIB14-BR | From July 1, 2018 to June 30, 2019 inclusive | |
| 155 | 894141241RM0003 | Flat-rolled product, of stainless steel, of a width of less than 600mm, not further worked than rolled, of part number 2144M5247-2 or 2144M5261-2 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 156 | 894141241RM0003 | Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of part number 22521-1, 22587-1, 161A2126-4, 51406-1 or CEVM 300M | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 157 | 894141241RM0003 | Aluminum castings, angles, shims, forge or sheets to be cut into shims, of part number 22573-1, 25207-1, 515Z3008-501W100R or 1003F6202C002 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 158 | 894141241RM0003 | Bar, flat or rectangle, not further worked than forged, of part number 161A1210-1 or 161A1210-2 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 159 | 894141241RM0003 or 894141241RM0004 |
Bar and rod, not further worked than cold-formed or cold-finished, of grade 4130 or 4340 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 160 | 894141241RM0003 | Aluminum plates, sheets and strip, of a thickness exceeding 0.2mm, of aluminum alloy, of part number 4557100025-004, 491Z1661-1, 495Z5511-7-MOD3, GD437-1051-7, 85216815-001, GD417-1606-3, GM147-0156-3/-4, 511Z3134-1, 1003M6322L001, 55-2355018-00, 1003M4003C001, 55-5059007-00, GC413-1238-1, 511Z3125-1, 82710621-103, 2143A6218-2, 32326-1, 2144M5286-1, 511Z3087-501, CC670-12213-3, QQA-250/12, 85714635-103, 83910542-101, S-AL-7050, 85713505-103, S-AL-7075-T7351, 1002720041-001 or 1005210117-001 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 161 | 894141241RM0003 | Aluminum bar (Rectangular, Round or Square) or extrusions, of part number 85711616-102 or 85712210-101/-102 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 162 | 894141241RM0001 or 894141241RM0004 |
Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of grade A286, 17-4 PH, 15-5 PH, 17-4 PH, 347, 304L, 303Se, 347 or 303 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 163 | 894141241RM0001 | Flat-rolled product, of other alloy steel, of a width of 600 mm or more, not further worked than hot-rolled, not in coils, of grade 4130, 1095, MIL-S-22499 or CO-NETIC | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 164 | 894141241RM0001 | Flat-rolled product, of other alloy steel, of a width of less than 600 mm, not further worked than hot-rolled, of grade CO-NETIC AA, CRES or AMIL-S-22499 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 165 | 894141241RM0001 | Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 625, 4130 or 4140 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 166 | 894141241RM0001 | Tube, of stainless steel, round, seamless, hot drawn, of grade 304 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 167 | 894141241RM0001 | Tube, round, seamless, hot drawn, of Grade 4130 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 168 | 894141241RM0001 or 894141241RM0004 |
Aluminum bar (rectangular, round or square) or extrusions, of grade 2024, 2219, 6061, 7075, 6063, 15-5 PH, 7075, 7150, 7055, 7136 or 2224 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 169 | 894141241RM0001 | Aluminum plates, sheets and strip, of a thickness exceeding 0.2mm, of grade 2024, 6061, 7075, 7475, 5052, 6013, 6061, 7140, 7175, S3-6 or 1100 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 170 | 894141241RM0001 | Formed aluminum can – tube with bottom, but no top, of grade 3003 or 1100 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 171 | 894141241RM0001 | Aluminum castings, angles, shims or sheets to be cut into shims, of grade 6063, 2024, 356, 17-4PH, 3003, A356 or 15-5PH | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 172 | 894141241RM0001 | Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of grade A286, 17-4 PH, 15-5 PH, 347, 304L, 303Se, 347 or 303 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 173 | 894141241RM0004 | Bar and rod, of part number R-ST-4330-4.000 DIA (alloy 4330), S-ST-4340-1.250 (alloy 4340) or S-ST-4340-1.250 X 2.000 (alloy 4340) |
From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 174 | 894141241RM0004 | Flat-rolled product, hot-rolled or cold-rolled, of grade 4130 or 4340 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 175 | 894141241RM0004 | Flat-rolled product, of other alloy steel, of a width of 600 mm or more, not further worked than hot-rolled, of grade 4340 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 176 | 894141241RM0004 | Bar and rod, of other alloy steel, not further worked than hot-rolled, hot drawn or extruded, of grade 4330, 4330M or 4340 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 177 | 894141241RM0004 | Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm, Part Number: S-AL-7050-T7452-3.500, S-AL-7050-T7452-600) (alloy 7050) or S-AL-7050 (alloy 7050) (-T7452)-5.500X5.500 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 178 | 894141241RM0004 | Aluminum castings, angles, shims, forge or sheet to be cut into shims, of grade 356, 7075 or 7175 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 179 | 894141241RM0004 | Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm, of grade 7050 or 7075 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 180 | 100869130 | Semi-finished product, of stainless steel, of rectangular (other than square) cross-section, of grade 13-8 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 181 | 100869130 | Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grades 13-8, 15-5 or 465 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 182 | 100869130 | Bar and rod, flat or rectangle, not further worked than forged, of grade 4330M | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 183 | 100869130 | Aluminum bar (rectangular, round or square) or extrusions, of grade 7075 or 7150 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 184 | 100869130 | Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm, of grade 2024, 2124, 2219, 2324, 6061, 7050, 7075, 7140, 7175 or 7475 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 185 | 100869130 | Aluminum castings, angles, shims, forge, or sheets to be cut into shims, of grade 7050, 7075 or 356 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 186 | 804861284 | Aluminum plates, sheets and strip, of a thickness exceeding 0.2mm, of grade 7175, 7475, 7050, 7075, 7010, 2024, 2124, 7040, 7140 or 7055 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 187 | 895418499 | Flat-rolled product, of iron or non-alloy steel, not clad, plated or coated, of grade SPC270A, SPC270C, SPC270DU, SPC440, SPC590, SPC590DU, SPH440-OD or SPH590-OD | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 188 | 895418499 | Flat-rolled product, of iron or non-alloy steel, clad, plated or coated, of grade SCGA270C-45, SCGA440-45, SCGA340HR-4 or SCGA340HR-45 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 189 | 895418499 | Flat-rolled product, of iron, non-alloy or other alloy steel, in coils, of grade SPH270C-OD, SPH270C-OF, SPH590FC-OF, SPH590SF-OD, SPC980DU, SPC980DUB or SPC1180DUB | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 190 | 895418499 | Flat-rolled product, of iron, non-alloy or other alloy steel, clad, plated or coated, of grade SCGA1180DUB-45, SCGA270D-45, SCGA270DU-45, SCGA590DU-45, SCGA980DUB-45 or SCGA1180DUB-45 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 191 | 105468391 | Stainless steel wire, of a diameter of 0.188 inch, of grade 17-7 PH, of specification AMS 5678 CLASS C | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 192 | 105468391 | Stainless steel plate, of a thickness of 2.5 inches thick, of grade 15-5 PH, of specification AMS 5862 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 193 | 105468391 | Stainless steel rectangular bar, of specification AMS 5629 or 5643 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 194 | 105468391 | Wire of stainless steel, part number MS20995C32 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 195 | 105468391 | Stainless steel bar, of a diameter of 3.5 inches, of grade 4330, of specification AMS 6427 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 196 | 105468391 | Aluminum bars, rods and profiles, of aluminum alloys, of specification AMS-QQ-A-200/3, AMS-QQ-A-200/3.19, AMS-QQ-A-200/11, AMS-QQ-A-200/15 or AMS-QQ-A-250/12 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 197 | 105468391 | Aluminum plates, sheets and strip, of aluminum alloys, of specification AMS 4050, AMS 4078, AMS 5862, AMS-QQ-A-250/4, AMS-QQ-A-250/5, AMS-QQ-A-250/12, BAMS 516-002, AMS 516-003 or BAMS 7-323 TYPE 1 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 198 | 105468391 | Other articles of aluminum, of the following descriptions and part numbers: nuts (BACC30M6, NAS1195DD3XH or NAS463XDD10), rivets (B0205017AD3-3.5S, BACR15BA3AD4C, BACR15BA4D4C, MS20426AD4-5, MS20470AD4-5A or NAS9302BNS-4-02), washers (BACS53B1EA2, NAS1149C0416R, NAS1149D0416H, NAS1149D0432K or NAS1149D1016K) or stand-offs (B0204040AL-18W) | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 199 | 883281107 | Flat-rolled product, cold-rolled annealed, in coils, with percentage of chromium, molybdenum or manganese lower than standard for Grade 4140 or 4142 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 200 | 103333662 | Bar and rod, cold-rolled, turned and polished, of 1045 grade steel, part number H200501400 or H200503600 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 201 | 100234301 | Bars and rods of other alloy steel, of grade 4140, 4145, 4330V, EN30B, PremoMax or 8620, of a diameter from 0.5 inch to 20 inches inclusive | For goods imported on or after July 1, 2018 | |
| 202 | 100234301 | Bars and rods, of stainless steel, of grade high strength austenitic non-magnetic stainless steel 1515HS, 1515C, Datalloy, DNM-140 or Nitronic, of a diameter from 1 inch to 15 inches inclusive | For goods imported on or after July 1, 2018 | |
| 203 | 100234301 | Bars and rods, of stainless steel, of grade 317, 347 or SCF19, of a diameter from 0.75 inch to 3 inches inclusive | For goods imported on or after July 1, 2018 | |
| 204 | 801135500 | Flat-rolled pressure vessel quality plate, not further worked than hot-rolled, of grade ASME SA-285-C | For goods imported on or after July 1, 2018 | Imported for sale to company with business number 100569987 |
| 205 | 891784126 | Concrete reinforcing bar, of grade 60, of specification ASTM A615/A615M, of a length of 300 mm to 850 mm inclusive, of a diameter from 15 mm to 30 mm inclusive | For goods imported on or after July 1, 2018 | |
| 206 | 891784126 | Concrete reinforcing bar, of grade 60, of specification A615/A615M, bent into an L shape with one length of 130 mm to 240 mm inclusive and the other length of 250 mm, of a diameter from 15 mm to 30 mm inclusive | For goods imported on or after July 1, 2018 | |
| 207 | 103872651 | Cold drawn bar, of grade 8620, with a diameter of up to 1.0625 inches, of minimum yield strength of 75,000 psi, of a hardness of 90 HRB to 26 HRC | For goods imported on or after July 1, 2018 | |
| 208 | 104402078 or 809569957 |
Hot-rolled plate, of grade CSA G40.21 350AT Cat 3, of a thickness of more than 1.5 inches, of a width of more than 116 inches, of a length of more than 580 inches | For goods imported on or after July 1, 2018 | Goods purchased under quote notice 18-0027 dated March 1, 2018 for project number 37195-0001 |
| 209 | 846855336; 144455847; 871196416; 782632293; or 809935364 |
Flat-rolled product, not further worked than hot-rolled, of grade SA-517-B, quenched and tempered, of a thickness from 0.25 inches to 0.45 inches inclusive, of a width from 90 inches to 120 inches inclusive, of a length from 273 inches to 445 inches inclusive | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts |
| 210 | 846855336; 144455847; 871196416; 782632293; or 809935364 |
Flat-rolled product, not further worked than hot-rolled, of grade SA-517-E, quenched and tempered, of a thickness from 0.25 inches to 1.750 inches inclusive, of a width from 96 inches to 120 inches inclusive, of a length from 280 inches to 454 inches inclusive | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts |
| 211 | 846855336; 144455847; 871196416; 782632293; or 809935364 |
Flat-rolled product, not further worked than hot-rolled, of grade SA-612 or SA-612N, quenched and tempered, of a thickness from 0.492 inches to 0.721 inches inclusive, of a width from 101 inches to 121 inches inclusive, of a length from 253 inches to 417 inches inclusive  | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts |
| 212 | 807325279 or 105497242 |
Round, Keystone and House shaped stainless steel wire, of grade 304L or 316L, annealed and cold rolled, of a width from 0.045 inches to 0.190 inches or of a diameter from 0.052 inches to 0.250 inches inclusive, of a height from 0.060 to 0.380 inches inclusive | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 105497242 |
| 213 | 102521416 | Stainless steel ingots of alloy 17-4, 304, 347 or GX-4 | From July 1, 2018 to June 30, 2019 inclusive | |
| 214 | 895418499 | Flat-rolled product of iron, non-alloy or other alloy steel, of specification SPC 440, SPH440, SPH590, SCGA270C, SCGA270D, SCGA270DV, SCGA340, SCGA440, SCGA590, SCGA980, SCGA 1100, SPC270C, SPC270D or SPC980 | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 105336598 |
| 215 | 104994397 | Flat-rolled product, of iron, non-alloy or other alloy steel, clad, plated or coated, of specification HR550LA-70G&70G-G1, ASTM A463M, GM6178M, WSD-M1A295-A3 or SCGA270D-45 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 216 | 104994397 | Aluminum plates, sheets and strip, of alloy AA5052-O/15935-AL-S-5000A, AA5052-H32 or SAE-J2340-340X | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 217 | 101603405 | Flat-rolled product, of iron or non-alloy steel, of specification SPH590-OD, GMW3032M-ST-S-HR550LA, 50002-340Y470T, MS264, SPH270C-OD, SPH440-OD, SPH590-OD, WSS-M1A365-A20 or WSS-M1A367-A46 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 218 | 101603405 | Flat-rolled product of iron or non alloy steel, clad, plated or coated, of specification SHGA270C-45, 50001- PHS950Y1300T, 50002-LAC340Y410T, 50002-LAC380Y450T, MS6000-44VA-355K, 50002-CR02-ELECTROGLAV GI 60/60 U, 50002-LAC550Y620T, 50002-LAH550Y620T or 50000- CR02-HDGALVANIZED GI 60/60 U | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 219 | 101603405 | Flat-rolled product of other alloy steel, of specification MS264, MS67, 50001-PHS950Y1300T, GMW3399M-STY-S-CR980T/700MP, WSS-M1A357-A1, GMW14400M-ST-S-HS1300T/950Y, 50002-LAC340Y410T, SPH270C-OD or SPH590-OD | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 220 | 710327693 | Flat-rolled product of grade 350 AT, of specification CSA G40.21 | From July 1 2018 to August 31, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form): 12997775643180 12997775643077 12997775794980 |
| 221 | 710327693 | Flat-rolled product of grade 350 AT or 350 WT, of specification CSA G40.21 | From July 1, 2018 to September 30, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form): 12997775758986 12997775776216 12997775794980 12997775794877 12997775810149 12997775820697 12997775891762 |
| 222 | 104402078 or 809569957 | Hot-rolled plate, of grade CSA G40.21 350AT Cat 3, of a thickness from 0.5 inch to 2 inches inclusive, of a width from 95 inches to 124 inches, of a length of 554 inches to 954 inches inclusive | From July 1, 2018 to December 31, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form): 13409084409760 13409084409942 13409086210857 13409086211006 13409086212860 13409086212882 13409086212893 13409086213155 13409086213326 13409086214704 13409086217397 13409086217605 |
| 223 | 103823704 | Flat-rolled product of iron or non-alloy steel, coated with zinc, of specification MS50002.LAC240Y320T (cold rolled) | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 224 | 103823704 | Flat-rolled product of iron or non-alloy steel, coated with zinc, of specification MS50002.LAH240Y320T (hot rolled) or MS50002.LAH340Y410T (hot rolled) | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 225 | 119873420 | Flat-rolled product of other alloy steel, cold-rolled, galvannealed, plated or coated with zinc, of specification MS6000-44VA | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 226 | 119873420 | Flat-rolled product of other alloy steel, cold-rolled, dual phase, galvanized, of specification MS50002 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 227 | 105120190 | Flat bar, of grade A572-50, of a thickness of 3 inches, of a width of 4 inches | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts |
| 228 | 105120190 | Flat bar, of grade A36, of a thickness of 2 inches, of a width of 2.25 inches | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts |
| 229 | 105492664 | Stainless steel, in coils, aluminized | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 230 | 104708409 | Flat-rolled product, not further worked than cold-rolled, of specification GMW3032M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 231 | 104708409 | Aluminum plates, sheets and strip, of specification GMW15192M-AL-S-6000-R-110-U | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 232 | 104546718 | Flat-rolled product, not further worked than cold-rolled, of specification GMW3032M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 233 | 887356392 | Flat-rolled product, not further worked than cold-rolled, of specification GMW3032M-ST-S or SAE J2340 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 234 | 887356392 | Flat-rolled product, galvanized, of specification GMW3032M-ST-S or SAE J2340 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 235 | 817808496 | Flat-rolled product, not further worked than cold-rolled, of specification GMW3032M-ST-S-CR420LA | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 236 | 100755628 | Ingots, of other alloy steel | For goods imported on or after July 1, 2018 inclusive | For goods ordered under one of the following purchase orders: 28702H 30136H 29522D 30209H 30222H |
| 237 | 100755628 | Ingots, of non-alloy steel | For goods imported on or after July 1, 2018 inclusive | For goods ordered under one of the following purchase orders: 28691H 30181H 30184H 30186H |
| 238 | 100755628 | Ingots, of other alloy or stainless steel | From July 1, 2018 to September 30, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form): 13276214951970 13276215051598 13276215179169 13276215179283 |
| 239 | 136523859 | Aluminum Louvres | From July 1, 2018 to November 30, 2018 inclusive | For imports recorded under the following transaction number (B3-3 Form): 13409534033114 |
| 240 | 862901691 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, of grade Duplex 2304 | From July 1, 2018 to December 31, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form): 12138734228501 12138734220477 12138734220503 12138734222629 12138734222890 12138734223700 12138734227920 12138734228011 12138734271388 12138734744562 12138734766967 12138734767354 12138734768242 12138734779906 12138734780204 12138734791979 12138734774068 12138734785061 12138734792765 12138734959551 12138735004719 12138735004229 12138735007119 12138735010706 12138735022915 12138735022937 12138735021082 12138735027362 12138735032438 12138735069329 12138735069363 12138735068011 12138735090985 12138735091167 12138735169934 |
| 241 | 809569957 | Flat-rolled product of grade 350 AT | From July 1, 2018 to August 31, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form): 13409084406892 13409086214873 13409086213612 13049084384168 13409086212702 13409084384044 13409084384226 |
| 242 | 141718262 | Flat-rolled product, of non-alloy steel, of grade 50AT CAT.2, 350AT CAT.2, 50 AT CAT.3 or 350AT CAT.3, of specification ASTM A6 or CSA G40.21 | From July 1, 2018 to December 31, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form): 11197004149460 11197004149507 11197004171971 11197004183715 11197004184384 11197004184395 11197004185125 11197004189276 11197004189880 11197004198051 |
| 243 | 141718262 | Flat-rolled product, of grade A572 | From July 1, 2018 to December 31, 2018 inclusive | For imports recorded under the following transaction number (B3-3 Form): 11197004223018 |
| 244 | 863402731 | Flat-rolled product, of non-alloy steel, of grade 50AT CAT.2, 350AT CAT.2, 50 AT CAT.3 or 350AT CAT.3, of specification ASTM A6 or CSA G40.21 | From July 1, 2018 to December 31, 2018 inclusive | Goods imported for sale to company with business number 141718262 and ordered under purchase order number 85563, 85565 or 85566 |
| 245 | 101980753 | Flat-rolled product of iron or non-alloy steel, hot-rolled, of specification GMW2M-ST-S, GMW3032M-ST-S, GMW3399M-ST-S or SAEJ2340 |
From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 246 | 101980753 | Flat-rolled product of iron or non-alloy steel, cold-rolled, of specification GMW2M-ST-S, GMW3032M-ST-S or GMW3399M-ST-S |
From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 247 | 101980753 | Flat-rolled product of iron or non-alloy steel, galvanized or electrogalvanized, of specification GMW2M-ST-S, GMW3032M-ST-S or GMW3399M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 248 | 101980753 | Flat-rolled product of other alloy steel, hot-rolled or cold-rolled, of specification GMW2M-ST-S, GMW3032M-ST-S, GMW3399M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 249 | 101980753 | Flat-rolled product of other alloy steel, galvanized, electrogalvanized, clad, plated or coated, of specification GMW2M-ST-S, GMW3032M-ST-S, GMW3399M-ST-S, GMW14400M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 250 | 101980753 | Tube of iron, non-alloy or other alloy steel, welded | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 251 | 101980753 | Aluminum sheet of specification GMW15192M-AL-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 252 | 101980753 | Rivets, bolts, nuts, rings, washers, screws and similar articles of aluminum | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 253 | 104708409 | Aluminum flat bars, round bars or extrusions, of alloy 6061-T6511 | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 896860590 |
| 254 | 105213755 | Wire of stainless steel, cold finished, of type 314, 330cb or 35/19cb, of a diameter less than 0.5 inch | For goods imported on and after July 1, 2018 | For use in the manufacture of original equipment parts or other parts |
| 255 | 105412845 | Flat-rolled product, of iron, non-alloy or other alloy steel, hot-rolled, of grade 050 XF, 060XF, 070 XF or 080XF, of a width less than 600 mm, of a thickness of 5.5 mm or less | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 256 | 105412845 | Flat-rolled product, of iron, non-alloy or other alloy steel, hot-rolled, of grade 1006, 1008 or 1010, of a width less than 600 mm, of a thickness of 5.5 mm or less | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 257 | 105412845 | Flat-rolled product, of iron, non-alloy or other alloy steel, hot-rolled, of grade 340 XF, 400XF, 420XF, 490XF or 550 XF, of a width less than 600 mm, of a thickness of 5.5 mm or less | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 258 | 105412845 | Flat-rolled product, of iron, non-alloy or other alloy steel, hot-rolled, of grade MS00026, of a width less than 600 mm, of a thickness of 5.5 mm or less | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 259 | 105412845 | Flat-rolled product, of iron, non-alloy or other alloy steel, cold-rolled, of grade MS00025, of a width less than 600 mm, of a thickness of 5.5 mm or less | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 260 | 105412845 | Flat-rolled product, of iron, non-alloy or other alloy steel, cold-rolled, of grade 40 MOD, 1055 or 4130, of a width less than 600 mm, of a thickness of 5.5 mm or less | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 261 | 105412845 | Wire, of iron or non-alloy steel, of a diameter of 0.079 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 262 | 103648721 | Aluminum extrusion, of alloy 6063-T6, of a length from 4 meters to 8 meters inclusive | For goods imported on and after July 1, 2018 | Goods ordered under purchase order number: 35605 35756 35811 35884 |
| 263 | 827413949 | Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1074 SAE J403, of a thickness of up to 3.7 mm inclusive, of a width of up to 250 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 264 | 827413949 | Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1020 SAE J403, of a thickness of up to 3.7 mm inclusive, of a width up to 250 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 265 | 827413949 | Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 060 SAEJ1392 or 420XF-SAEJ2340, of a thickness of up to 4.5 mm inclusive, of a width of up to 275 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 266 | 827413949 | Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1010 SAE J403, of a thickness up to 2.5 mm inclusive, of a width of up to 250 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 267 | 827413949 | Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, of grade 1045 SAE J403, of a thickness of up to 4 mm inclusive, of a width of up to 250 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 268 | 104708409 | Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, annealed, of grade SAE J403 1050, of a thickness from 0.0758 inch to 0.111 inch inclusive, of a width from 6.97 inches to 10.2 inches inclusive | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 827413949 |
| 269 | 104708409 | Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, annealed, of grade SAE J403 1075, of a thickness from 0.157 inch to 0.181 inch inclusive, of a width of 5.325 inches | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 827413949 |
| 270 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1074 SAE J403, of a thickness of up to 0.04 inch inclusive, of a width of 9.25 inches | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 827413949 |
| 271 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1010 SAE J403, annealed, of a thickness from up to 0.09 inch inclusive, of a width of 6.97 inches | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 827413949 |
| 272 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1020 SAE J403, of a thickness of up to 0.08 inch inclusive, of a width of 8.35 inches | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 827413949 |
| 273 | 102466950 | Aluminum sheet of alloy 2024, 2219, 5052, 6013, 6061 or 7075, of a thickness from 0.012 inch to 0.2 inch inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 274 | 102466950 | Aluminum plate of alloy 2024, 6061, 7050, 7075 or 7475, of a thickness from 0.25 inch to 5 inches inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 275 | 102466950 | Aluminum bar, of alloy 2024, 6061 or 7075, of a cross-section of 0.5 inch to 3 inches inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 276 | 102466950 | Aluminum extrusion of alloy 2024, 2219, 6061, 7075 or 7150 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 277 | 102466950 | Aluminum rivets, screws, bolts, nuts and similar articles, of alloy 2024 or 6061 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 278 | 102466950 | Flat-rolled product, cold-rolled, of grade 301, 302, 321, 347, 4130, 15-5PH, 17-7PH, 17-4PH or A289, of a thickness from 0.018 inch to 0.128 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 279 | 102466950 | Bars and rods, of grade 303, 304, 4340 or 17-4PH, of a cross-section from 0.625 inch to 1.75 inches inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 280 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, hot-rolled, of specification UMG 1035 spheroidized and annealed, of a thickness from 0.0984 inch to 0.126 inch inclusive | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 896543659 |
| 281 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, hot-rolled, of specification UMG 1050 spheroidized and annealed, of a thickness from 0.0984 inch to 0.122 inch inclusive | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 896543659 |
| 282 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, hot-rolled, of specification NES M2021 SP231-440, of a thickness from 0.0748 inch to 0.0866 inch inclusive | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 896543659 |
| 283 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, hot-rolled, of specification SAEJ1392 050XF or SAEJ1392 550XF, of a thickness from 0.0551 inch to 0.063 inch inclusive | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 896543659 |
| 284 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, hot-rolled, of specification MS-264 080XF, of a thickness from 0.0984 inch to 0.1063 inch inclusive | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 896543659 |
| 285 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, hot-rolled, of specification Toyota TSG31016 SPH440-OD, of a thickness from 0.0866 inch to 0.0945 inch inclusive | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 896543659 |
| 286 | 101865749 | Flat-rolled product, of specification LAC240Y320T GI 60/60 U, of a nominal thickness of 2.2 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 287 | 101865749 | Flat-rolled product, of specification LAH240Y320T GI 60/60 U, of a nominal thickness of 1.8 mm or 3 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 288 | 101865749 | Flat-rolled product, of specification LAC340Y410T GI 60/60 U, of a nominal thickness of 1.8 mm or 2.2 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 289 | 101865749 | Flat-rolled product, of specification LAH340Y410T GI 60/60 U, of a nominal thickness of 3 mm or 4 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 290 | 101865749 | Flat-rolled product, of specification LAH550Y620T GI 60/60 U, of a nominal thickness of 3 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 291 | 104708409 | Flat-rolled product, hot-rolled, of specification SAE J2340 420 XF, of a thickness from 0.165 inch to 0.1731 inch inclusive | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 867203804 |
| 292 | 104708409 | Flat-rolled product, hot-rolled, of specification WSS-M1A346 Grade A5, of a thickness from 0.1397 inch to 0.1437 inch inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 293 | 867888109 | Aluminum plates, sheets and strip, of alloy 2024, 6061 or any alloy of the 7000 series (including alloy 7010, 7040, 7050, 7055, 7075, 7150, 7175 or 7474), of a thickness exceeding 0.2 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 294 | 867888109 | Aluminum castings, angles, shims, forge or sheets to be cut into shims | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 295 | 867888109 | Other articles of aluminum, including bolts, rivets or washers, of a kind used in aerospace application | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 296 | 868088089 | Special bar quality (SBQ) carbon steel bar, in coils, of grade AISI 1536, 3130, 4120, 4320 or 4330, of a diameter from 0.8125 inch to 1.125 inches inclusive | From July 1, 2018 to May 20, 2019 inclusive | |
| 297 | 881231807 | Flat-rolled product, hot-rolled, in coils, of specification TSG 3101G SPH590-OD, of a nominal thickness of 2.6 mm, of a width of 1,201 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 298 | 119457869 | Carbon steel pipe, longitudinally welded, of an outside diameter of 41 inches, 48 inches or 53 inches, of a length of 40 feet, conforming to standard AWWA C200 | For goods imported on and after July 1, 2018 | Goods purchased under Request for Supplier Qualifications No. 18-016 |
| 299 | 122791510 | Flat-rolled product, of specification 50001-PHS950Y1300T, of a nominal thickness of 0.0475 inch or 0.0625 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 300 | 122791510 | Flat-rolled product, of specification 50002-LAC340Y410T, of a nominal thickness of 0.0475 inch, 0.059 inch or 0.079 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 301 | 122791510 | Flat-rolled product, of specification 50002-LAH550Y620T, of a nominal thickness of 0.1185 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 302 | 122791510 | Flat-rolled product, of specification 50002-CR01, of a nominal thickness of 0.0585 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 303 | 122791510 | Flat-rolled product, of specification 50002-LAC240Y320T, of a nominal thickness of 0.0585 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 304 | 122791510 | Flat-rolled product, of specification 50002-DPC420Y780T, of a nominal thickness of 0.0475 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 305 | 122791510 | Flat-rolled product, of iron, non-alloy or other alloy steel, aluminized boron, of a nominal thickness of 0.0625 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 306 | 122791510 | Flat-rolled product, of specification GN 50XK, of a nominal thickness of 0.122 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 307 | 737270728 | Tube or hollow profile, welded, of circular cross-section, of other alloy steel | From July 1, 2018 to December 31, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form): 16717206170456 16717206175861 16717206175974 16717206195091 16717206199040 16717206199197 16717206207950 16717206226247 16717206226326 |
| 308 | 896543659RM0014 | Flat-rolled product, of other alloy steel, hot-rolled, pickled and oiled, of grade SAE J1392-050 YHF, of a thickness of 0.118 inch or 0.124 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 309 | 817313737 | Aluminum profiles, aluminum doors, windows and their frames, or cloth, grill, netting and fencing, of aluminum wire | For goods imported on and after July 1, 2018 | For imports recorded under one of the following transaction numbers (B3-3 Form): 13292934658174 13292934713923 13292934863981 13292934946526 13292935295748 13292935357242 13292935407173 13292936106466 |
| 310 | 859363764 | Bar and rod, in coils, of grade 1537M, 4119M or 4318M, of a diameter from 19.05 mm to 30.16 mm inclusive | For goods imported on and after July 1, 2018 | For use in the manufacture of original equipment parts or other parts |
| 311 | 104040183 | Bar and rod, of specification A36 or A529, of grade 50, 44W or 50 W, of a diameter of 0.75 inch, 1 inch or 1.25 inch | For goods imported on and after July 1, 2018 | Goods imported for sale to company with business number 119382679 |
| 312 | 124108564 | Flat-rolled product of iron, non-alloy steel or other alloy steel, hot-rolled, of grade DQSK, JSH270C, JSH440W or JSH590R | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 313 | 124108564 | Flat-rolled product of iron, non-alloy steel or other alloy steel, cold-rolled, of grade CRDF140T, DF140, DQSK, JSC270C, JSC 270F, JSC440W, JSC590R, JSC780Y or JSC980YL | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 314 | 124108564 | Flat-rolled product of iron, non-alloy steel or other alloy steel, galvannealed, of grade JAC270C, JAC270D, JAC270E, JAC270F, JAC340H, JAC440W, JAC570C, JAC590R, JAC590Y, JAC780T, JAC780Y, JAC980YL or JAH440W | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 315 | 890975758 | Round bar, of grade C1045, of a diameter from 1.5 inches to 3.5 inches inclusive, turned, ground and polished (TG&P) | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts |
| 316 | 890975758 | Round bar, of grade C1045, turned and polished (TP), of a diameter of 0.75 inch | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts |
| 317 | 132644584 | Aluminum profiles, produced by an impact extrusion process, of alloy 6061-T6, of an outside diameter of up to 55 mm, of a wall thickness from 3.5 mm to 5.5 mm inclusive | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts |
| 318 | 780854485 | Special Bar Quality (SBQ) bars, of grade AISI C-1536, A-4623-M, C-1541-VM, OP15, A-4320-M, A-4138-M, A-4330-M or A-4142-M, of chemical analysis in accordance with ASTM A751, of tensile strength in accordance with ASTM A370, of hardness in accordance ASTM E18, of a diameter from 0.625 inch to 1.5 inches inclusive, and of a length from 25 feet to 30.2 feet inclusive | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 319 | 103430336 or 856874649 | Flat bar, hot-rolled, of grade AISI 1526 or 1527, of a thickness of 0.25 inch, of a width of 1 inch or 1.25 inches | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336 |
| 320 | 103430336 or 856874649 | Flat bar, hot-rolled, of grade AISI 1526 or 1527, of a thickness of 0.375 inch, of a width of 1.25 inches, 1.5 inches, 1.75 inches, 2.25 inches or 2.375 inches | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336 |
| 321 | 103430336 or 856874649 | Flat bar, hot-rolled, of grade AISI 1526 or 1527, of a thickness of 0.5 inch, of a width of 2 inches or 2.5 inches | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336 |
| 322 | 103430336 or 856874649 | Flat bar, hot-rolled, of grade AISI 1526 or 1527, of a thickness of 0.625 inch, of a width of 2 inches or 2.5 inches | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336 |
| 323 | 103430336 or 856874649 | Flat bar, hot-rolled, of grade mild steel A36, of a thickness of 0.1875 inch, of a width of 2.5 inches | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336 |
| 324 | 103430336 or 856874649 | Flat bar, hot-rolled, of grade mild steel A36, of a thickness of 0.5 inch, of a width of 2 inches | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336 |
| 325 | 103430336 or 856874649 | Flat bar, hot-rolled, of grade mild steel A36, of a thickness of 0.75 inch, of a width of 3 inches or 4 inches | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336 |
| 326 | 103430336 or 856874649 | Flat bar, hot-rolled, of grade mild steel A36, of a thickness of 1 inch, of a width of 3 inches, 4 inches or 6 inches | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336 |
| 327 | 103430336 or 856874649 | Flat bar, hot-rolled, of grade mild steel A36, of a thickness of 2 inches, of a width of 3 inches | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336 |
| 328 | 103430336 or 856874649 | Round bar, hot-rolled, of grade AISI 1526 or 1527, of a diameter of 0.75 inch, 0.875 inch or 1 inch | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336 |
| 329 | 131695603 | Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, of specification GMW3032M-ST-S HR340LA, GMW3032M-ST-S HR550LA, SAE J2340 340XF or SAE J2340 550XF | From July 1, 2018 to December 31, 2018 | For use in the manufacture of original equipment parts or other parts |
| 330 | 131695603 | Flat-rolled product, of iron or non-alloy steel, in coils, cold-rolled, of specification GMW3032M-ST-S CR340LA or GMW3032M-ST-S CR420LA | From July 1, 2018 to December 31, 2018 | For use in the manufacture of original equipment parts or other parts |
| 331 | 753425081 | Bar, round, of stainless steel, of grade A286, of specification AMS 5732 | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 332 | 753425081 | Bar, round or hexagonal, of stainless steel, of grade 321, of specification AMS 5645 or QQ-S-763 | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 333 | 753425081 | Bar, round, of stainless steel, of grade 304, of specification AMS 5639 | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 334 | 753425081 | Bar, round, of stainless steel, of grade 303 or 303Se, of specification ASTM A582, AMS 5641 or AMS 5738 | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 335 | 753425081 | Bar, round, of stainless steel, of grade 302, of specification MIL-S-7720 | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 336 | 753425081 | Bar, round, of other alloy steel, of grade 4340, of specification AMS 6414 or AMS 6415 | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 337 | 753425081 | Bar, round, of other alloy steel, of grade 4130, of specification AMS 6348 | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 338 | 753425081 | Bar, round, of other alloy steel, of grade 4140, of specification AMS 6382, AMS 6349 or AMS-S-5626 | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 339 | 753425081 | Tube, of other alloy steel, of grade 4130, of specification AMS 6360 | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 340 | 753425081 | Flat-rolled product, of other alloy steel, of grade 4130, of specification AMS 6345 | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 341 | 102251972 | Tube, seamless or electric resistance welded, of grade L80, of an outside diameter of 2.875 inches | From July 1, 2018 to May 20, 2019 | |
| 342 | 710327693 | Flat-rolled product of grade 350 AT, of specification CSA G40.21 | From July 1, 2018 to December 31, 2018 inclusive | For imports recorded under the transaction number 12997231584049 (B3-3 Form) |
| 343 | 866460074 | Flat-rolled product, cold-rolled, spheroidized and annealed, of grade 1035, 1045 or 1050, of a width from 33 mm to 246 mm inclusive, of a thickness from 2.9 mm to 7.1 mm inclusive | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts |
| 344 | 122016587 | Flat-rolled product, cold-rolled, annealed, of grade 1074 or 1075, of a thickness of 0.02 inch | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 345 | 122016587 | Bar of stainless steel, round or rectangular, of grade 15-5PH, of specification AMS 5659 | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 346 | 122016587 | Flat-rolled product, hot-rolled, of grade 4130, of a thickness of 0.09 inch, of a width of 36 inches | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 347 | 122016587 | Flat-rolled product, cold-rolled, of grade 4130, of a thickness of 0.04 inch or 0.08 inch, of a width of 36 inches | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 348 | 122016587 | Bar, hot-rolled, of grade 4340, of specification AMS 6415, of a diameter of 3.5 inches, 5.25 inches or 5.5 inches | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 349 | 122016587 | Aluminum bar, round, annealed, of specification AMS 4000 or 4102, of a diameter of 0.4375 inch | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 350 | 889457701 | Bar and rod, of grade 8620, of a diameter from 4.25 inches to 7 inches inclusive | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 351 | 107388720 | Coded fish tag of stainless steel, of dimensions of 1.1 mm by 0.25 mm | For goods imported on or after July 1, 2018 | |
| 352 | 119354884 | Sections of iron or non-alloy steel, hot-rolled, of grade 1012, of specification ASTM A-576, of a width of 5.5 inches or more, of a length of 18 feet or more | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 353 | 102251972 | Tube, of non-alloy or alloy steel, seamless, of specification A.P.I. L80,C90, T95 or P110, of an outside diameter greater from 60.32 mm to 114.3 mm inclusive | From July 1, 2018 to May 20, 2019 | |
| 354 | 102251972 | High strength sour service casing, of specification A.P.I. Grade C90, T95, C110 or equivalent proprietary specification, of an outside diameter from 114.3 mm to 244.5 mm inclusive | From July 1, 2018 to May 20, 2019 | |
| 355 | 102251972 | Tube, of non-alloy or alloy steel, of specification A.P.I. L80 or P110, of an outside diameter from 60.32 mm to 114.3 mm inclusive | From July 1, 2018 to May 20, 2019 | |
| 356 | 102963790 | Rectangular welded tube, of specification SAE 1008/1010 ASTM A513, of a wall thickness of 0.042 inch, of dimensions of 0.75 inch by 1 inch by 9.2 inches | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 357 | 106234289 | Hollow core aluminum extrusion, of alloy 6005A or 6061 | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 358 | 106234289 | Flat-rolled product, welded, consisting of an aluminum sheet of alloy 5083 and a steel sheet of grade Q345 | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 359 | 106234289 | Aluminum bar, of alloy 6061, of a width of 12.1 inches, of a height of 3.725 inches, of a length of 74.25 inches | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 360 | 140515958 | Aluminum profile, not hollow, of alloy 6063-T5, of a diameter of up to 0.332 inch inclusive, consisting of three or five blades | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 361 | 100770320 | Aluminum bars, rods and profiles, of aluminum alloy of the 6000 series, of a nominal wall thickness from 0.03 inch to 0.1 inch | From July 1, 2018 to May 20, 2019 | |
| 362 | 890975758 | Flat-rolled products, bars, rods, angles, shapes, sections, tubes, pipes or hollow profiles, of non-alloy or alloy steel | From March 19, 2019 to May 20, 2019 | For use in the manufacturing of agricultural equipment and transferred from UND 58703 location |
| 363 | 856874649 | Bar, of grade 400W, of metric bar size 10M, 15M, 20M, 25M or 30M | From July 1, 2018 to May 20, 2019 | Goods imported for sale to company with business number 103605371 and ordered under purchase order number 663057 or 18-11017 |
| 364 | 856874649 | Bar, of grade 50, of a diameter of 0.625 inch or 0.875 inch | From July 1, 2018 to May 20, 2019 | Goods imported for sale to company with business number 103605371 and ordered under purchase order number 18-11017 or 18-12005 |
| 365 | 811893296 | Flat-rolled product, in coils, galvannealed, of grade Prime Deep Drawing Quality (DDQ) or Prime Extra Deep Drawing Quality (EDDQ), of a thickness from 0.0449 inch to 0.048 inch inclusive | From July 1, 2018 to May 20, 2019 | For use in the manufacture of parts |
| 366 | 101087963 | Parts for fireplace, classified under tariff item 7304.51.00, 7306.90.00, 7321.90.10, 7321.90.23, 7321.90.90 or 7616.99.90 | From July 1, 2018 to May 20, 2019 | Parts sold by Hearth & Home Technologies |
| 367 | 104613658 | Grouser bar, merchant bar quality (MBQ), hot rolled, of grade 1070, of Rockwell hardness of 25 to 30 | From July 1, 2018 to May 20, 2019 | |
| 368 | 104708409 | Hot-rolled black carbon steel plate, of specification ASTM A572-50 modified, of a thickness from 0.3125 inch to 0.5625 inch, of a width of 96 inches, of a length of 312 inches | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 369 | 104708409 | Hot-rolled black carbon steel plate, of specification ASTM A36 modified, ABS Grade A, of a thickness from 0.25 inch to 0.5 inch, of a width of 96 inches, of a length of 312 inches | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 370 | 101131027 | Flat-rolled product of iron or non-alloy steel, of structural steel Grade 33, in-line tension levelled (max shape of less than 15 I-units), galvanized to specification HDG G90, of a width of 48 inches, of a minimum thickness from 0.018 inch to 0.0235 inch inclusive | From July 1, 2018 to May 20, 2019 | For use in the manufacture of parts |
| 371 | 104708409 | Flat-rolled product, not further worked than cold-rolled, in coils, of specification SAE J403, of grade 1010, of a thickness of 0.018 inch or 0.02 inch, of a width of 42 inches | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 372 | 104546718 | Flat-rolled product, cold-rolled, galvanized, of grade HSLA 420LA, of a nominal thickness of 0.098 inch, of a width of more than 50 inches | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 373 | 104546718 | Flat-rolled product, galvanized, of specification GMW3032M-ST-S-500LA, of a thickness of 0.045 inch or more | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 374 | 794117093 | Flat-rolled product, hot-rolled, of trademarked grade HSLA TuffDOM 620, alloyed with vanadium, of a minimum thickness of 0.342 inch, 0.362 inch, 0.394 inch or 0.416 inch | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 375 | 794117093 | Flat-rolled product, hot-rolled, of grade HSLA 70XF, alloyed with vanadium, of a minimum thickness of 0.13 inch | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 376 | 780318317 | Flat-rolled product, in coils, cold-rolled, of specification HFT 440 or HFT 590, of a thickness of 1.2 mm or 1.73 mm | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 377 | 780318317 | Flat-rolled product, in coils, cold-rolled, of specification DI-FORM 140T, DEV DI-FORM T590, DEV DI-FORM T1180 or DEV DI-FORM T980Y600, of a thickness from 0.8 mm to 2 mm inclusive | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 378 | 780318317 | Flat-rolled product, in coils, cold-rolled, of specification TSG3100G SPC590DU, of a thickness from 1.2 mm to 1.8 mm inclusive | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 379 | 780318317 | Flat-rolled product, hot-rolled or cold-rolled, galvannealed of specification TSG3109G SCGA590DU, TSG 3109G SCGA780DU, TSG 3109G SCGA980DUB or TSG SCGA1190DUB, of a thickness from 1 mm to 2.3 mm inclusive | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| 380 | 780318317 | Flat-rolled product, hot-rolled or cold-rolled, galvannealed, of grade Extra Deep Drawing Steel (EDDS), of a thickness from 0.6 mm to 0.8 mm inclusive | From July 1, 2018 to May 20, 2019 | For use in the manufacture of original equipment parts or other parts |
| Item | Tariff Item | Description of Goods |
|---|---|---|
| 1 | 4412.39.00 | Other, with both outer plies of coniferous wood, for use in Canadian manufactures |
| 2 | 4811.59.00 | Other, for use in Canadian manufactures |
| 3 | 8903.10.00 | Inflatable |
| 4 | 8903.91.00 | Sailboats, with or without auxiliary motor |
| 5 | 8903.92.00 | Motorboats, other than outboard motorboats |
| 6 | 8903.99.90 | Other |
| 7 | 9404.21.00 | Of cellular rubber or plastics, whether or not covered, for use in Canadian manufactures |
| 8 | 3923.21.90 | Other, for use in Canadian manufactures |
| 9 | 3923.29.90 | Other, for use in Canadian manufactures |
| 10 | 1602.50.99 | Other, for use in Canadian manufactures |
| 11 | 4412.99.90 | Other, for use in Canadian manufactures |
Page details
- Date modified: